Analog Insulation Testers MY10 Series (DISCONTINUED)

Specifications - Model MY10-01

Rating	125V/20MΩ
Effective Measuring Range	0.01-20MΩ
Central Scale Value	0.5MΩ
AC Voltage Measurement	0 to 250 V
Lower Limit	0.125MΩ
Rated Current	1-1.2 mA
Approx. Overall Scale Length	107 mm
Battery Life	Approx. 10 hours when continuously operated on manganese - oxide batteries with the pointer pointing to the central scale value.
Batteries	Four AA (R6P) batteries
Approx. Width	125 mm
Approx. Height	103 mm
Approx. Depth	53 mm
Approx. Weight	500 g
Compliance	EN61010-1:1993; EN61010-2-31:1995 (Overvoltage Category III, Pollution Degree 2 installations for indoor use)
Standard Accessories	Batteries (Qty - 4) Earth Probe (98002) (Qty - 1) Line Probe (98001) (Qty - 1) Protection Cover (93013) (Qty - 1) Shoulder Strap (99005) (Qty - 1) User's Manual (Qty - 1)

 

Standard Test Conditions - Model MY10-01

 

Ambient Temperature/Humidity Ranges	23 ±5 /45-75% RH
Position of Use	Horizontal (5° max. of angle of inclination)
Battery Voltage	Within effective voltage range (The pointer must stay within the range indicated by the BAT symbol when the battery check is performed.)
Tolerance Mentioned Conditions	Resistance measurement: First effective measuring range = ±5% of reading Second effective measuring range = ±10% of reading Infinite and zero scale values: 0.7% max. of scale length AC voltage: ±10% of maximum scale value No-load voltage: 130% max. of rated voltage Rated measuring current: 1 mA (0 to 20%) when in first effective measuring range Short-circuit current: 12 mA max.

 

Additional Functions - Model MY10-01

 

• Automatic discharge function
  • If the object under test remains electrified after the MEAS switch is turned off, the tester lets you know by turning on the LED lamp. If you leave the tester connected to the electrified object, the tester automatically begins to discharge electricity and then finishes discharging-the LED lamp comes on and then goes out.
  • When the object under test is capacitive and electrified, the tester lets you know by turning on the LED lamp. When left connected to the object, the tester automatically discharges electricity, thus preventing possible electric shock or spike noise at power-on.
• Battery check (BAT mark on the scale plate)

 

Specifications - Model MY10-02

Rating	250V/50MΩ
Effective Measuring Range	0.01-50MΩ
Central Scale Value	1MΩ
AC Voltage Measurement	0 to 300 V
Lower Limit	0.25MΩ
Rated Current	1-1.2 mA
Approx. Overall Scale Length	107 mm
Battery Life	Approx. 10 hours when continuously operated on manganese - oxide batteries with the pointer pointing to the central scale value.
Batteries	Four AA (R6P) batteries
Approx. Width	125 mm
Approx. Height	103 mm
Approx. Depth	53 mm
Approx. Weight	500 g
Compliance	EN61010-1:1993; EN61010-2-31:1995 (Overvoltage Category III, Pollution Degree 2 installations for indoor use)
Standard Accessories	Batteries (Qty - 4) Earth Probe (98002) (Qty - 1) Line Probe (98001) (Qty - 1) Protection Cover (93013) (Qty - 1) Shoulder Strap (99005) (Qty - 1) User's Manual (Qty - 1)

 

Standard Test Conditions - Model MY10-02

 

Ambient Temperature/Humidity Ranges	23 ±5 /45-75% RH
Position of Use	Horizontal (5° max. of angle of inclination)
Battery Voltage	Within effective voltage range (The pointer must stay within the range indicated by the BAT symbol when the battery check is performed.)
Tolerance Mentioned Conditions	Resistance measurement: First effective measuring range = ±5% of reading Second effective measuring range = ±10% of reading Infinite and zero scale values: 0.7% max. of scale length AC voltage: ±10% of maximum scale value No-load voltage: 130% max. of rated voltage Rated measuring current: 1 mA (0 to 20%) when in first effective measuring range Short-circuit current: 12 mA max.

 

Additional Functions - Model MY10-02

 

• Automatic discharge function
  • If the object under test remains electrified after the MEAS switch is turned off, the tester lets you know by turning on the LED lamp. If you leave the tester connected to the electrified object, the tester automatically begins to discharge electricity and then finishes discharging-the LED lamp comes on and then goes out.
  • When the object under test is capacitive and electrified, the tester lets you know by turning on the LED lamp. When left connected to the object, the tester automatically discharges electricity, thus preventing possible electric shock or spike noise at power-on.
• Battery check (BAT mark on the scale plate)

 

Specifications - Model MY10-03

Rating	500V/100MΩ
Effective Measuring Range	0.05-100MΩ
Central Scale Value	2MΩ
AC Voltage Measurement	0 to 500 V
Lower Limit	0.5MΩ
Rated Current	1-1.2 mA
Approx. Overall Scale Length	107 mm
Battery Life	Approx. 10 hours when continuously operated on manganese - oxide batteries with the pointer pointing to the central scale value.
Batteries	Four AA (R6P) batteries
Approx. Width	125 mm
Approx. Height	103 mm
Approx. Depth	53 mm
Approx. Weight	500 g
Compliance	EN61010-1:1993; EN61010-2-31:1995 (Overvoltage Category III, Pollution Degree 2 installations for indoor use)
Standard Accessories	Batteries (Qty - 4) Earth Probe (98002) (Qty - 1) Line Probe (98001) (Qty - 1) Protection Cover (93013) (Qty - 1) Shoulder Strap (99005) (Qty - 1) User's Manual (Qty - 1)

 

Standard Test Conditions - Model MY10-03

 

Ambient Temperature/Humidity Ranges	23 ±5 /45-75% RH
Position of Use	Horizontal (5° max. of angle of inclination)
Battery Voltage	Within effective voltage range (The pointer must stay within the range indicated by the BAT symbol when the battery check is performed.)
Tolerance Mentioned Conditions	Resistance measurement: First effective measuring range = ±5% of reading Second effective measuring range = ±10% of reading Infinite and zero scale values: 0.7% max. of scale length AC voltage: ±10% of maximum scale value No-load voltage: 130% max. of rated voltage Rated measuring current: 1 mA (0 to 20%) when in first effective measuring range Short-circuit current: 12 mA max.

 

Additional Functions - Model MY10-03

 

• Automatic discharge function
  • If the object under test remains electrified after the MEAS switch is turned off, the tester lets you know by turning on the LED lamp. If you leave the tester connected to the electrified object, the tester automatically begins to discharge electricity and then finishes discharging-the LED lamp comes on and then goes out.
  • When the object under test is capacitive and electrified, the tester lets you know by turning on the LED lamp. When left connected to the object, the tester automatically discharges electricity, thus preventing possible electric shock or spike noise at power-on.
• Battery check (BAT mark on the scale plate)

 

Specifications - Model MY10-04

Rating	500V/1000MΩ
Effective Measuring Range	0.5-1000MΩ
Central Scale Value	20MΩ
AC Voltage Measurement	0 to 500 V
Lower Limit	1MΩ
Rated Current	0.5-0.6 mA
Approx. Overall Scale Length	107 mm
Battery Life	Approx. 10 hours when continuously operated on manganese - oxide batteries with the pointer pointing to the central scale value.
Batteries	Four AA (R6P) batteries
Approx. Width	125 mm
Approx. Height	103 mm
Approx. Depth	53 mm
Approx. Weight	500 g
Compliance	EN61010-1:1993; EN61010-2-31:1995 (Overvoltage Category III, Pollution Degree 2 installations for indoor use)
Standard Accessories	Batteries (Qty - 4) Earth Probe (98002) (Qty - 1) Line Probe (98001) (Qty - 1) Protection Cover (93013) (Qty - 1) Shoulder Strap (99005) (Qty - 1) User's Manual (Qty - 1)

 

Standard Test Conditions - Model MY10-04

 

Ambient Temperature/Humidity Ranges	23 ±5 /45-75% RH
Position of Use	Horizontal (5° max. of angle of inclination)
Battery Voltage	Within effective voltage range (The pointer must stay within the range indicated by the BAT symbol when the battery check is performed.)
Tolerance Mentioned Conditions	Resistance measurement: First effective measuring range = ±5% of reading Second effective measuring range = ±10% of reading Infinite and zero scale values: 0.7% max. of scale length AC voltage: ±10% of maximum scale value No-load voltage: 130% max. of rated voltage Rated measuring current: 1 mA (0 to 20%) when in first effective measuring range Short-circuit current: 12 mA max.

 

Additional Functions - Model MY10-04

 

• Automatic discharge function
  • If the object under test remains electrified after the MEAS switch is turned off, the tester lets you know by turning on the LED lamp. If you leave the tester connected to the electrified object, the tester automatically begins to discharge electricity and then finishes discharging-the LED lamp comes on and then goes out.
  • When the object under test is capacitive and electrified, the tester lets you know by turning on the LED lamp. When left connected to the object, the tester automatically discharges electricity, thus preventing possible electric shock or spike noise at power-on.
• Battery check (BAT mark on the scale plate)

 

Specifications - Model MY10-05

Rating	1000V/2000MΩ
Effective Measuring Range	1-2000MΩ
Central Scale Value	50MΩ
AC Voltage Measurement	0 to 500 V
Lower Limit	2MΩ
Rated Current	0.5-0.6 mA
Approx. Overall Scale Length	107 mm
Battery Life	Approx. 10 hours when continuously operated on manganese - oxide batteries with the pointer pointing to the central scale value.
Batteries	Four AA (R6P) batteries
Approx. Width	125 mm
Approx. Height	103 mm
Approx. Depth	53 mm
Approx. Weight	500 g
Compliance	EN61010-1:1993; EN61010-2-31:1995 (Overvoltage Category III, Pollution Degree 2 installations for indoor use)
Standard Accessories	Batteries (Qty - 4) Earth Probe (98002) (Qty - 1) Line Probe (98001) (Qty - 1) Protection Cover (93013) (Qty - 1) Shoulder Strap (99005) (Qty - 1) User's Manual (Qty - 1)

 

Standard Test Conditions - Model MY10-05

 

Ambient Temperature/Humidity Ranges	23 ±5 /45-75% RH
Position of Use	Horizontal (5° max. of angle of inclination)
Battery Voltage	Within effective voltage range (The pointer must stay within the range indicated by the BAT symbol when the battery check is performed.)
Tolerance Mentioned Conditions	Resistance measurement: First effective measuring range = ±5% of reading Second effective measuring range = ±10% of reading Infinite and zero scale values: 0.7% max. of scale length AC voltage: ±10% of maximum scale value No-load voltage: 130% max. of rated voltage Rated measuring current: 1 mA (0 to 20%) when in first effective measuring range Short-circuit current: 12 mA max.

 

Additional Functions - Model MY10-05

 

• Automatic discharge function
  • If the object under test remains electrified after the MEAS switch is turned off, the tester lets you know by turning on the LED lamp. If you leave the tester connected to the electrified object, the tester automatically begins to discharge electricity and then finishes discharging-the LED lamp comes on and then goes out.
  • When the object under test is capacitive and electrified, the tester lets you know by turning on the LED lamp. When left connected to the object, the tester automatically discharges electricity, thus preventing possible electric shock or spike noise at power-on.
• Battery check (BAT mark on the scale plate)