The V Scale SPAN mode on the DL850 can be used to adjust the upper and lower display limits of the zoom window. To optimize the V Scale SPAN mode to make the best resolution measurements, follow the procedures listed below.
The ScopeCorder modules all have 20 divisions, and not the usual 10 division with standard oscilloscopes. There are actually 25 vertical divisions but we recommend you use only 20 divisions to stay within the specified accuracy for that module.
Note: Make sure to install or update the firmware to version 1.35 or later. Several improvements have been made which includes changes to the SPAN adjustment under any vertical menu/channel.
Please download the attached PowerPoint presentation for more information and detailed measurements regarding the ScopeCorder vertical resolution.
Data acquisition (DAQ) is the measurement, recording, analyzing, and presentation of real world phenomena. It includes electrical measurements such as voltage, current, power as well as measurements through sensors and transducers including temperature, pressure, strain, vibration, and more.
Yokogawa high speed data acquisition systems deliver industry leading isolation, bit resolution, sampling rate, and memory depth, with independent channel hardware and easy to use software.
Capture, analyze, and troubleshoot electrical or real-world physical signals. Oscilloscopes observe the change of electrical signals over time, continuously graphed on a display as voltage or amplitude vs. time.
A ScopeCorder is an instrument combining a mixed signal oscilloscope and portable data acquisition recorder into a modular platform designed to capture both high-speed transients and low speed trends. Yokogawa’s ScopeCorder product family provides flexible and high-performance multi-channel test instruments by combining a variety of signal conditioning input modules, on-board calculations, and deep data acquisition storage into a off-the-shelf data acquisition solution.