What is the Service Procedure for Verifying Time Axis Accuracy?

The Time Axis Accuracy is the accuracy of the A/D clock. It is not possible to directly measure the A/D clock and the A/D clock is not output from the ScopeCorder DL850/SL1400. To verify the accuracy of the A/D clock, you will need to input a 1.0005 MHz wave into DL850/SL1400 under the condition of 1ms/div and 10k Record length.

If the horizontal scale is 1ms/div and the record length is 10k results in a sampling rate of 1MHz. If the sampling rate is 1MHz and the signal input is 1.0005MHz, a 0.0005MHz aliasing effect occurs. You will then confirm whether the accuracy of the aliasing effect result value is in the range of 0.0005MHz ± 0.005%.

If the result is in the range of 0.0005MHz ± 0.005%, then the time axis is within specification. The result of an aliasing phenomenon has the same accuracy of the real input signal. This method is used for DL850/SL1400 but other DL series scopes uses a similar method.

Produtos e Soluções Relacionadas

DL2700 Digital Oscilloscope

DL7440/DL7480 Digital Oscilloscopes

8-channel 500 MHz oscilloscope with 16 logic inputs, for applications where four channels aren't enough. Support for eight analog channels, 16 bits with 250MHz logic bandwidth, 16MP of recording memory, power analysis, serial bus analysis, and a broad selection of voltage and current probes.

DL9000 DSO Series

500MHz, 1.0GHz, and 1.5GHz DSOs for debug and high performance applications. 10th
generation oscilloscope from Yokogawa with industry leading 2.5 million wfms/sec and lowest dead time. Winner of Test & Measurement World's "Best in Test" award.

DLM2000 Mixed Signal Oscilloscopes

200, 350, and 500MHz mixed-signal oscilloscopes for every engineer. Best-in-class performance in usability, acquisition, analysis, and display—all at a price you can digest. Options include serial bus, vehicle bus, and power supply analysis functions.

DLM6000 MSO & DSO Series

500MHz, 1.0GHz, and 1.5GHz DSO and MSO models for debug, waveform characterization, bench top, or automated test applications. 4 channel models with 16 or 32 logic inputs. 12th generation oscilloscope with ergonomic physical and on-screen improvements.

Aquisição de Dados (DAQ)

Os sistemas de aquisição de dados da Yokogawa proporcionam a você mais flexibilidade e poder para medir, exibir, armazenar e até mesmo atuar qualquer número de fenômenos físicos ou elétricos.

High Speed Data Acquisition

Yokogawa high-speed data acquisition systems
Industry-leading isolation, bit resolution, sampling rate, and memory depth
Independent channel hardware and easy to use software

Mixed Signal Oscilloscopes

Yokogawa mixed signal oscilloscopes
Simultaneous, time correlated observations
Analysis of analog with digital (logic) signals
Troubleshooting electrical anomalies, measuring parametric values, monitoring signals

Osciloscópios

Osciloscópios digitais de classe mundial da Yokogawa: Os osciloscópios digitais têm amostragem de alta velocidade e uma ampla gama de larguras de banda que podem ser utilizadas para projeto e desenvolvimento de dispositivos eletrônicos. As ScopeCorders têm as vantagens de um osciloscópio digital e de um gravador de dados multicanal.

OSCILÓGRAFOS

Flexible, high-performance Yokogawa ScopeCorder
Modular platform combines mixed signal oscilloscope and portable data acquisition recorder
Captures high-speed transients and low-speed trends