Can Xviewer decode RPM from a pulse-train?

Can Xviewer decode RPM from a pulse-train?

I recommend using a Freq module for this - becuase it has many advantages;

However, in a pinch, Xviewer could be used to do this:

RPM = Frequency divided by pulses/rotation X 60

Example: Gear turning once per second (60 RPM):
Gear with 20 teeth monitored by hall-effect device.
This gear gives 20 pulses per rotation.

Therefore, if 20 Hertz is measured, then RPM = [20Hertz/(20pulses/1rotation)] X 60 = 60 RPM.

And, likewise, if 40 Hertz is measured, then RPM = [40Hertz/(20pulses/1rotation)] X 60 = 120 RPM.

In Xviewer MATH VERSION this would be (FV(C1))/20
… if it cannot be 'nested', use MATH1=FV(C1) and MATH2=M1/20.

Related Products & Solutions

Data Acquisition (DAQ)

Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.

High Speed Data Acquisition

Yokogawa high-speed data acquisition systems
Industry-leading isolation, bit resolution, sampling rate, and memory depth
Independent channel hardware and easy to use software

Oscilloscope Application Software

Software for advanced analysis and remote operation
Synchronize multiple instruments from PC
API's for third party software integration

Oscilloscopes

Digital oscilloscopes
High-speed sampling
Range of bandwidths for electronic device design and development
Advantages of oscilloscope and multi-channel data recorder

ScopeCorders

An integrated measurement system for every electromechanical application
Modular platform combines oscilloscope and DAQ functionality
Capture high-speed transients and low-speed trends

Top