Can Xviewer decode RPM from a pulse-train?

Can Xviewer decode RPM from a pulse-train?
I recommend using a Freq module for this - becuase it has many advantages;
However, in a pinch, Xviewer could be used to do this:
RPM = Frequency divided by pulses/rotation X 60
Example: Gear turning once per second (60 RPM):
Gear with 20 teeth monitored by hall-effect device.
This gear gives 20 pulses per rotation.
Therefore, if 20 Hertz is measured, then RPM = [20Hertz/(20pulses/1rotation)] X 60 = 60 RPM.
And, likewise, if 40 Hertz is measured, then RPM = [40Hertz/(20pulses/1rotation)] X 60 = 120 RPM.
In Xviewer MATH VERSION this would be (FV(C1))/20
… if it cannot be 'nested', use MATH1=FV(C1) and MATH2=M1/20.  

Related Products & Solutions

Data Acquisition (DAQ)

Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.

High Speed Data Acquisition

  • Yokogawa high-speed data acquisition systems
  • Industry-leading isolation, bit resolution, sampling rate, and memory depth
  • Independent channel hardware and easy to use software


  • Digital oscilloscopes
  • High-speed sampling
  • Range of bandwidths for electronic device design and development
  • Advantages of oscilloscope and multi-channel data recorder

Oscilloscopes Application Software

  • Yokogawa's oscilloscope application software
  • View, export, analyze, and manage data 


  • Flexible, high-performance Yokogawa ScopeCorder
  • Modular platform combines mixed signal oscilloscope and portable data acquisition recorder 
  • Captures high-speed transients and low-speed trends