Can Xviewer decode RPM from a pulse-train?

Can Xviewer decode RPM from a pulse-train?

I recommend using a Freq module for this - becuase it has many advantages;

However, in a pinch, Xviewer could be used to do this:

RPM = Frequency divided by pulses/rotation X 60

Example: Gear turning once per second (60 RPM):
Gear with 20 teeth monitored by hall-effect device.
This gear gives 20 pulses per rotation.

Therefore, if 20 Hertz is measured, then RPM = [20Hertz/(20pulses/1rotation)] X 60 = 60 RPM.

And, likewise, if 40 Hertz is measured, then RPM = [40Hertz/(20pulses/1rotation)] X 60 = 120 RPM.

In Xviewer MATH VERSION this would be (FV(C1))/20
… if it cannot be 'nested', use MATH1=FV(C1) and MATH2=M1/20.

Yokogawa数据采集系统具备出众的灵活性和性能，能测量、显示、存储甚至促动各种物理和电气现象。

Yokogawa在业界首推示波记录仪的概念，将数字示波器和多通道数据记录仪的优点集于一身。横河示波记录仪作为世界一流的示波记录仪，具有高速采样能力和大测量带宽的优点，可广泛应用于电子工程的设计和开发过程。

横河示波器既有面向低成本市场的4CH MSO示波器DLM3000系列，也有业界全新的8CH MSO示波器DLM5000系列，在由智能控制的消费电子和工业驱动等电路设计的众多领域中，成为全球工程师的首选工具。

使用YOKOGAWA的示波器应用软件，可查看、导出、分析和管理数据，例如Xviewer（701922）、加速整体工程流程的软件平台IS8000等。

Flexible, high-performance Yokogawa ScopeCorder
Modular platform combines mixed signal oscilloscope and portable data acquisition recorder
Captures high-speed transients and low-speed trends

Yokogawa高速数据采集系统提供业界领先的隔离、位分辨率、采样速率和存储长度，带有独立的通道硬件和使用简单的软件。是示波记录仪中最领先的技术。