发生器、信号源
Yokogawa的信号源和信号发生器功能强大、精确度高，可用于通用的独立式应用，也可作为高速测试和测量系统的核心部件。信号源和测量单元合二为一，大大简化了测试流程。因此，您可以方便快捷地进行半导体设备、传感器、显示屏和电池等的特性分析。
-
Yokogawa的GS820是一款可编程DC电压和电流发生器，可用来对电子设备(如半导体设备和电子元器件等)的电压、电流和其它特性进行高速高精度测量。它是一种出色的支持单元，具有行业中最快的测试速度。
概览:
《应用探索》是一份电子快讯，每两个月发布一期，向客户通报我们最新的新闻和产品应用。
概览:
在经过2009年灾难之后，很多上市的测试仪器公司业务在2010年取得了高速增长。
概览:
Unfortunately, we cannot upgrade a GS200 to add the /MON option. The GS series instruments, which includes the GS610 and GS820, cannot be retrofitted or upgraded with new options after the initial purchase. All ...
概览:
No, the GS610 and the GS820 cannot be used solely as a DMM to measure only voltage. This is because the Sense terminal cannot be separated from the Output terminal on the instrument. The GS Series uses the Output ...
概览:
The following attached document details the typical output noise of the GS200 from DC to 20 MHz.
概览:
The GS610/GS820 output is insulated from the cover case. Therefore, if you want to amplify the output voltage more than 1 unit (or 1 ch) you must connect the system in series. If you want to increase the output ...
概览:
The following attached document details the typical output noise of the GS200 from DC to 20 MHz.
概览:
The GP-IB command of the GS200 shares the same mode as the 7651. It can be swithced to 488.2 mode.
概览:
This is a list of command mnemonics which can be used to describe the GS610 program pattern file.○：Setting has changed successfully△：Setting has been received but failed×：Setting has not been ...
概览:
The GS610/GS820 output is insulated from the cover case. Therefore, if you want to amplify the output voltage more than 1 unit (or 1 ch) you must connect the system in series. If you want to increase the output ...
概览:
Unfortunately, we cannot upgrade a GS200 to add the /MON option. The GS series instruments, which includes the GS610 and GS820, cannot be retrofitted or upgraded with new options after the initial purchase. All ...
概览:
The AC Power Input in all Yokogawa instruments is designed as a 3-pin connection (one of which is a GND pin). In some parts of the world, PCs are sold with AC power cables that are 2-pin. Often times this means the ...
概览:
It is possible to connect multiple GS units in series/parallel connections to boost the maximum voltage/current, provded the values are within the range of maximum voltage/current of those limiters. To amplify the ...
概览:
No, the GS610 and the GS820 cannot be used solely as a DMM to measure only voltage. This is because the Sense terminal cannot be separated from the Output terminal on the instrument. The GS Series uses the Output ...
概览:
This is a list of command mnemonics which can be used to describe the GS610 program pattern file.○：Setting has changed successfully△：Setting has been received but failed×：Setting has not been ...
概览:
The GP-IB command of the GS200 shares the same mode as the 7651. It can be swithced to 488.2 mode.
概览:
The AC Power Input in all Yokogawa instruments is designed as a 3-pin connection (one of which is a GND pin). In some parts of the world, PCs are sold with AC power cables that are 2-pin. Often times this means the ...
概览:
It is possible to connect multiple GS units in series/parallel connections to boost the maximum voltage/current, provded the values are within the range of maximum voltage/current of those limiters. To amplify the ...