How do I use the DLM2000 Enhanced Parameter Measurement and Calculation Feature?

The DLM2000 Series Oscilloscope is capable of performing enhanced parameter measurements and calculations. This feature allows you to perform automated measurements of waveform parameters of two different areas. It will also allow you to perform automated calculations using the measured waveform parameters such as RMS, max, min, frequency, rise, fall, etc. To configure the DLM2000 for enhanced measurements and calculations, follow the procedures listed below:

  1. Press the Measure » Enhanced soft button
  2. Press the Item Setup (Area2) soft button
  3. Use the Jog Shuttle and SET knob to set the source waveform and measurement items
  4. Press ESC to return to Enhanced Setup menu
  5. Press the Time Range soft button and select the display window Main, Zoom1, or Zoom2
  6. Press ESC to return to Enhanced Setup menu
  7. Use the Jog Shuttle and SET knob to set the Time Range
  8. Press the Calc Setup soft button to modify and select the expression to use


Please see the attached PowerPoint file for more examples of enhanced calculation expressions. 

Note

  • Make sure you are running Firmware version 1.81 or later. 
  • You cannot use the enhanced parameter measurement feature when the statistical processing mode is set to Cycle

Related Products & Solutions

DL9000 DSO Series

500MHz, 1.0GHz, and 1.5GHz DSOs for debug and high performance applications. 10th
generation oscilloscope from Yokogawa with industry leading 2.5 million wfms/sec and lowest dead time. Winner of Test & Measurement World's "Best in Test" award.

DLM2000 Mixed Signal Oscilloscopes

200, 350, and 500MHz mixed-signal oscilloscopes for every engineer. Best-in-class performance in usability, acquisition, analysis, and display—all at a price you can digest. Options include serial bus, vehicle bus, and power supply analysis functions.

DLM6000 MSO & DSO Series

500MHz, 1.0GHz, and 1.5GHz DSO and MSO models for debug, waveform characterization, bench top, or automated test applications. 4 channel models with 16 or 32 logic inputs. 12th generation oscilloscope with ergonomic physical and on-screen improvements.

Mixed Signal Oscilloscopes

A mixed signal oscilloscope is an instrument enabling the simultaneous, time correlated observations and analysis of analog with digital (logic) signals, to establish causal relationships between the various areas of a device's electronics. They are purpose-built tools for troubleshooting electrical anomalies, measuring parametric values, and monitoring cause and effect relationships between signals.

Oscilloscopes

Capture, analyze, and troubleshoot electrical or real-world physical signals. Oscilloscopes observe the change of electrical signals over time, continuously graphed on a display as voltage or amplitude vs. time.

 
Top