Ripple Noise Measurement with High Definition Oscilloscope
Ripple Noise Measurement with High Definition Oscilloscope
Issue:
Ripple noise observation of a switching power supply is usually performed with AC coupling, but there may be times when you want to see the waveform including DC, such as when the output fluctuates greatly. At that time, conventional 8-bit oscilloscopes do not have sufficient resolution, making it difficult to capture noise. Some operators overdrive the waveform to capture it, but be careful as it distorts the waveform and makes it impossible to measure accurately.
Solution:
The DLM5000HD with 12-bit ADC has 16 times the vertical resolution compared to 8-bit oscilloscopes, making it ideal for such measurements. Also, a record length of up to 1 G points enables long time measurements at high sample rates.
Switching power supply output element overview
Observation of ripple noise (BW 100MHz, high-res mode)
Switching noise can be identified even in waveforms taken with DC coupling.
Related Industries
Related Products & Solutions
702921 PBDH0400 Differential Probe 1000 V / 400 MHz
- Wide-bandwidth high-voltage differential probe
- 400 MHz bandwidth
- Max. differential voltage: ±1000V (DC + ACpeak) at 500:1
- Probe power: Dedicated probe interface for DLM3000, DLM3000HD, DLM5000, DLM5000HD
702922 PBDH0400 Differential Probe 2000 V / 400 MHz
- Wide-bandwidth high-voltage differential probe
- 400 MHz bandwidth
- Max. differential voltage: ±2000V (DC + ACpeak) at 1000:1
- Probe power: Dedicated probe interface for DLM3000, DLM3000HD, DLM5000, DLM5000HD
DLM3000HD Series High-Definition Oscilloscope
- 4 analog channels with up to 8 digital channels
- Up to 500 MHz bandwidth and 2.5 GS/s acquisition
- High-definition acquisition with up to 16-bit resolution
- Up to 1 Gpoint memory with 200,000 waveform history
- Synchronization for up to 8 analog channels with advanced serial bus analysis
DLM5000HD Series High-Definition Oscilloscope
- 4 or 8 analog channels with optional 32 digital channels
- Up to 500 MHz bandwidth and 2.5 GS/s acquisition
- High-definition acquisition with up to 16-bit resolution
- Up to 1 Gpoint memory with 200,000 waveform history
- Multi-unit synchronization and advanced serial bus analysis
High Voltage Differential Probe 701927
- 150 MHz bandwidth
- ±1.4 kV max. differential voltage
- 50 dB CMRR (1 MHz)
- Interface: Yokogawa DLM Series
High Voltage Differential Probe 701978
- 150 MHz bandwidth
- ±1.5 kV max. differential voltage
- 50 dB CMRR (1 MHz)
- Interface: BNC
High Voltage Differential Probe 702923
- 400 MHz bandwidth
- ±1 kV max. differential voltage
- 70 dB CMRR (1 MHz)
- Interface: BNC
High Voltage Differential Probe 702924
- 400 MHz bandwidth
- ±2 kV max. differential voltage
- 70 dB CMRR (1 MHz)
- Interface: BNC
Mixed Signal Oscilloscopes
- Analyze analog and digital signals simultaneously
- Advanced triggering and high-speed waveform capture
- Power analysis, serial bus analysis, & switching loss
Oscilloscopes
Accelerate debugging and gain deeper insight with high-resolution oscilloscopes designed for speed, clarity, and precision.
