Why Can't the High-Speed Data Acquisition Unit SL1000 Acquisition Software Detect my USB Connection?
Solutions:
- Verify that the Group and Unit ID on the SL1000 main unit are set to "0." The Group and Unit ID are the blue rotary switches located on the rear of the SL1000 main unit.
- If the Agilent I/O Library Suite or software was previously or is currently installed on the PC, please disable the software or un-install it completely. Re-boot the PC and reconnect to the SL1000 using the SL1000 Acquisition Software.
- Download and re-install the latest USB drivers.
For Windows Vista/7 64-bit OS, install the x64 drivers.
For Windows Xp/Vista/7 32-bit OS, install the x32 drivers.
Possible Reasons this Issue Occurs:
- The SL1000 Group and Unit ID is not set to "0"
- The Agilent I/O Libraries Suite was previously or is currently installed on the PC.
The Agilent I/O Libraries Suit will prohibit the SL1000 Acquisition Software from connecting to the SL1000 main unit via USB. The Agilent I/O Libraries Suite is usually installed when you install Agilent hardware drivers for software control. It will tie up the USB port and not allow any other DAQ device to connect. A list of other known issues with these libraries can be found by clicking on the following link:
http://www.home.agilent.com/upload/cmc_upload/All/readme_LXIClassBUpdate.htm#Known_bugs
Note: This issue may also apply to other instruments which use our Yokogawa acquisition or analysis software, such as the WE7000 or DL750/DL750P.
Related Products & Solutions
Data Acquisition (DAQ)
Scalable DAQ systems with industry-leading isolation, noise immunity, built-in conditioning, and real-time analysis, ensuring accurate, reliable measurements and faster decisions.
High Speed Data Acquisition
- PC-based, streaming, local, or remote operation
- 20+ modules, isolated and versatile inputs
- Up to 200 MS/s or 640 ch
- Used in aerospace, automotive, energy, and manufacturing industries
Isolated Oscilloscopes | ScopeCorders
- An integrated measurement system for every electromechanical application
- Modular platform combines oscilloscope and DAQ functionality
- Capture high-speed transients and low-speed trends
Oscilloscopes
Accelerate debugging and gain deeper insight with high-resolution oscilloscopes designed for speed, clarity, and precision.
SL1000 High-Speed Data Acquisition Unit
Predecessor to SL2000. A PC-based ScopeCorder system capable of synchronizing multiple chassis.
WE7000 PC-Based Measurement Instruments
One system, multiple instruments: WE7000 satisfies demands for fast, reliable and precise data acquisition which uses a standard laptop or PC as its user interface. Input modules plug into an expandable measuring station. Via the optical interface, it is possible to galvanically isolate the laptop/PC.
