How do I Resolve the Warning Error 142 at Wavelength Calibration on AQ6319?

The warning "142 WL calibration failed" is displayed when a level of light source is not enough at wavelength calibration or calibration cannot be executed because wavelength difference is out of calibration range.

There are three suggestions listed below.

  1. Please clean the connected fiber cable or exchange the cable for another
  2. Please initialize the alignment adjustment value and wavelength calibration value
  3. Please initialize the current parameter setting value, data, alignment adjustment value, and wavelength calibration value 

After restarting, please try the wavelength calibration again.

  2. Select ALL CLEAR
  3. Select EXCECUTE
  4. Please confirm output level of standard light source (CW, around -22 dBm) by optical power meter

Related Products & Solutions

AQ6319 Optical Spectrum Analyzer

With high performance capabilities and a wavelength resolution of 10 picometer or less, the AQ6319 is designed for advanced research and development applications. With a wavelength range or 600 to 1700 nm this OSA offers an excellent combination of wavelength range and resolution.

Optical Spectrum Analyzer

An Optical Spectrum Analyzer (or OSA) is a precision instrument designed to measure and display the distribution of power of an optical source over a specified wavelength span. An OSA trace displays power in the vertical scale and the wavelength in the horizontal scale.

Optical Test Equipment

Yokogawa offers solutions to measure both traditional and cutting-edge optical components and systems, serving the increasing demand for high capacity fiber lines, and new component technologies.