Will a Reverse Polarity Connection of DC Power to the DL750 Damage the Unit?

Making a reverse polarity connection of DC power to the DL750 with the DC power supply option will not damage the unit. The DL750 has a built-in protection circuit that will prevent damage to the unit in this situation. To recover from a reverse polarity connection, simply perform the following:
  1. Remove the reverse polarity connection from DL750
  2. Turn the DL750 OFF for 1 minute
  3. Connect the DC power to the DL750 with the correct polarity
  4. Power ON the DL750
  5. DL750 will recover and run self test and calibration

Related Products & Solutions

Data Acquisition (DAQ)

Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.

High Speed Data Acquisition

Yokogawa high speed data acquisition systems deliver industry leading isolation, bit resolution, sampling rate, and memory depth, with independent channel hardware and easy to use software.

Oscilloscopes

World-class digital oscilloscopes from Yokogawa: The digital oscilloscopes have high-speed sampling and a wide range of bandwidths that can be utilized for design and development of electronic devices. The ScopeCorders have the advantages of both a digital oscilloscope and a multi-channel data recorder.

ScopeCorders

A ScopeCorder is an instrument combining a mixed signal oscilloscope and portable data acquisition recorder into a modular platform designed to capture both high-speed transients and low-speed trends. Yokogawa’s ScopeCorder product family provides flexible and high-performance multi-channel test instruments by combining a variety of signal conditioning input modules, onboard calculations, and deep data acquisition storage into an off-the-shelf data acquisition solution.

 
Top