Precision Double Bridge 2752 (Lab-Grade Accuracy) (DISCONTINUED)

Notice: This product was discontinued on Oct 16, 2019.

Laboratory-grade accuracy ±0.03 to ±0.05%
Quick readout without error
Excellent long-term stability: The resistance elements are made of selected manganin wire, stabilized by both artificial and natural aging after being wound.
Perfect guard system
Stable measurement: The dial switches offer low contact resistance and little change due to aging, giving stable operation. Inner/outer contact type plugs are used for changing the multiplication factor, assuring little change in the resistance due to reinsertion of plugs.
Built-in standard resistors
Bar resistor measurement

Brochures

Instruction Manuals

Dimensions	497（W）×316（H）×140（D）mm, excluding protrusions 19.57 x 12.44 x 5.51 in.
Weight	Approx. 11.5kg 25.4 lbs
Measuring Range	0.1000mΩ to 111.10Ω in five digits
Measuring Arm	(At Multiplier x1) 100mΩ x 10 + 10mΩ x 10 + 1mΩ x10 + (0.05 to 1.05mΩ)
Multiplier	x 0.001 x 0.01 x 0.1 x 1 x 10 x 100
Accuracy	At resistances potential Leads and current leads less then 10mΩ/wire; ±(0.03Ω of reader +1µΩ) at temperature at 10 to 35°C±2.5°C, ±(0.05Ω x multiplier +0.01mΩ) at temperature at 10 to 40°C
Insulation Resistance	More than 100MΩ at 500V DC between the electric circuit and the case
Dielectric Strength	500V AC for one minute between electric circuit and case
Case	Grey metal Case, with plastic feet and carrying handles
Current Rating	30A at x 0.001, 10A at x 0.01, 3A at x 0.1, 0.5A at x 1, 0.15A at x 10, 0.05A at x 100
Optional Accessories	2012 DC Volt-ammeter 2707 electronic galvanometer (rear cover) 2753 Measuring Cords 2754 clamp device. 2791 Slide resistor

Looking for more information on our people, technology and solutions?