How Can I Programatically Verify if the Calculations for Waveform Parameters are Completed?

There are two methods to programmatically determine if the calculations for waveform parameters is completed on the DL series oscilloscopes.

  1. Send the :MEAS:WAIT? command.
    This will ensure that no other commands are executed until the measurement phase is completed. Please see the attached Pic1.jpg diagram to view the implementation of this method in LabVIEW.
  2. Monitor Bit-8 of the Extended Event Register
    This method must be completed in two parts. The first part sets the instrument to monitor the falling edge of bit-8 of the Extended Event Register. The second part will be to read the value of the register.
          i.  Send the :STATUS:FILTER8 FALL command to set the instrument to monitor 
          ii. Send the :STATUS:EESR? command to read the return value of the register. This value will be 128 when the waveform parameter calculations are complete. Please see the attached Pic2.jpg diagram to view the implementation of this method in LabVIEW.

Produtos e Soluções Relacionadas

DL7440/DL7480 Digital Oscilloscopes

8-channel 500 MHz oscilloscope with 16 logic inputs, for applications where four channels aren't enough.  Support for eight analog channels, 16 bits with 250MHz logic bandwidth, 16MP of recording memory, power analysis, serial bus analysis, and a broad selection of voltage and current probes.

DL9000 DSO Series

500MHz, 1.0GHz, and 1.5GHz DSOs for debug and high performance applications. 10th
generation oscilloscope from Yokogawa with industry leading 2.5 million wfms/sec and lowest dead time. Winner of Test & Measurement World's "Best in Test" award.

DLM2000 Mixed Signal Oscilloscopes

200, 350, and 500MHz mixed-signal oscilloscopes for every engineer. Best-in-class performance in usability, acquisition, analysis, and display—all at a price you can digest. Options include serial bus, vehicle bus, and power supply analysis functions.

DLM6000 MSO & DSO Series

500MHz, 1.0GHz, and 1.5GHz DSO and MSO models for debug, waveform characterization, bench top, or automated test applications. 4 channel models with 16 or 32 logic inputs. 12th generation oscilloscope with ergonomic physical and on-screen improvements.

Mixed Signal Oscilloscopes

  • Yokogawa mixed signal oscilloscopes
  • Simultaneous, time correlated observations
  • Analysis of analog with digital (logic) signals
  • Troubleshooting electrical anomalies, measuring parametric values, monitoring signals

Oscilloscopes Application Software

  • Yokogawa Test&Measurement oscilloscope application software
  • View, export, analyze, and manage data 

Osciloscópios

Osciloscópios digitais de classe mundial da Yokogawa: Os osciloscópios digitais têm amostragem de alta velocidade e uma ampla gama de larguras de banda que podem ser utilizadas para projeto e desenvolvimento de dispositivos eletrônicos. As ScopeCorders têm as vantagens de um osciloscópio digital e de um gravador de dados multicanal.

Precision Making

Topo