702921 PBDH0400 Differential Probe 1000 V / 400 MHz
This high-voltage differential probe features a wide frequency range from DC to 400 MHz, excellent frequency response flatness, and superior common mode rejection ratio (CMRR) characteristics.
|
Bandwidth |
: |
DC to 400 MHz |
|
Attenuation |
: |
500:1/50:1 |
|
Max. Input Voltage (to Ground) |
: |
±1000V (DC + ACpeak) |
|
Max. Differential Voltage |
: |
±1000V (DC + ACpeak) at 500:1 attenuation |
|
Max. Non-Destructive Input Voltage |
: |
±1500V (DC + ACpeak) (within 5 seconds) |
|
Probe Power |
: |
Dedicated probe interface |
|
For use with DLM3000, DLM3000HD, DLM5000, DLM5000HD series |
||
Easy Measurements for High-Speed, High-Voltage Electronics
- Measure non-grounded (floating) signals in applications such as inverters, motors, and power supplies
- Especially useful for high-speed high-voltage switching operations of IGBTs and SiC devices
- Attenuation ratio can be selected, automatically recognized, and configured (along with the input impedance setting) to help prevent setting errors
- No separate power supply is required, which allows for immediate measurement after connection
- Expanded range of optional accessories according to the measurement target
- Combine with a high-definition oscilloscope (like DLM3000HD or DLM5000HD) for more accurate waveform measurements
Specifications
| Frequency Band | DC TO 400 MHz (-3 dB) |
|---|---|
| Input Attenuation Ratio | 50:1 and 500:1, User Selectable |
| Input Impedance (to Ground) | Approximately 6 MΩ, Approximately 5 pF |
| Maximum Allowed Differential Voltage | ± 1000V (DC+ACpeak) (500:1) ± 100V (DC+ACpeak) (50:1) |
| Maximum Common Mode Input Voltage (to Ground) | ± 1000V (DC+ACpeak) |
| Maximum Non-Destructive Input Voltage (to Ground) | ±1500V (DC + ACpeak) (within 5 seconds) |
| Common Mode Rejection Ratio (CMRR) (Typical) | -80 dB(60 Hz), -50 dB(10 MHz), -30 dB(100 MHz), -20 dB(400 MHz) |
| Connector Type (Power Supply) | Yokogawa Probe Interface Only (Applicable to DLM3000, DLM3000HD, DLM5000, and DLM5000HD) |
| External Dimensions (Approximate) | Head : 173.5(H) x 58(W) x 26.5(D) mm Connector : 80(H) x 29(W) x 24(D) mm |
| Total Length | Approximately 2.4 meters |
| Weight | Approximately 300 grams |
| Measurement Category | CAT II 1000 V, CAT III 600 V |
Brochuras
- PBDH0400 Differential probe 702921, 702922 (620 KB)
- Probes and accessories for Oscilloscopes (2.2 MB)
Manual de instruções
Topo