Ripple Noise Measurement with High Definition Oscilloscope
Ripple Noise Measurement with High Definition Oscilloscope
Issue:
Ripple noise observation of a switching power supply is usually performed with AC coupling, but there may be times when you want to see the waveform including DC, such as when the output fluctuates greatly. At that time, conventional 8-bit oscilloscopes do not have sufficient resolution, making it difficult to capture noise. Some operators overdrive the waveform to capture it, but be careful as it distorts the waveform and makes it impossible to measure accurately.
Solution:
The DLM5000HD with 12-bit ADC has 16 times the vertical resolution compared to 8-bit oscilloscopes, making it ideal for such measurements. Also, a record length of up to 1 G points enables long time measurements at high sample rates.
Switching power supply output element overview
Observation of ripple noise (BW 100MHz, high-res mode)
Switching noise can be identified even in waveforms taken with DC coupling.
Indústrias Relacionadas
Produtos e Soluções Relacionadas
701927 Differential Probe 1400V / 150 MHz
- 701927 Isolated Differential Probe
- 150 MHz
- Max. Differential Voltage: ±1400 V (DC + ACpeak) at 500:1
- Probe Power: dedicated probe interface For DLM, DL, and SB5000 series
701978 Differential Probe 1500 V / 150 MHz
- 701978 Differential Probe for Oscilloscope
- 1500 V / 150 MHz
- 500:1 / 50:1
- Max. Differential Voltage：±1500 V (DC + ACpeak)
702921 PBDH0400 Differential Probe 1000 V / 400 MHz
- Wide-bandwidth high-voltage differential probe
- 400 MHz bandwidth
- Max. differential voltage: ±1000V (DC + ACpeak) at 500:1
- Probe power: Dedicated probe interface for DLM3000, DLM3000HD, DLM5000, DLM5000HD
702922 PBDH0400 Differential Probe 2000 V / 400 MHz
- Wide-bandwidth high-voltage differential probe
- 400 MHz bandwidth
- Max. differential voltage: ±2000V (DC + ACpeak) at 1000:1
- Probe power: Dedicated probe interface for DLM3000, DLM3000HD, DLM5000, DLM5000HD
DLM3000HD Series High-Definition Oscilloscope
The DLM3000HD redefines high-definition in a compact design
- 4 analog channels
- 8-bit logic
- Bandwidth: 350 or 500 MHz
- Sample Rate: up to 2.5 GS/s
- Vertical resolution: 12-bit
- High resolution mode: up to 16-bit
- Measurement memory: up to 1 GigaPoints
- History waveforms: up to 200,000 triggers
- Synchronization function for up to 8 analog channels
- Logic and Serial Bus Analysis
DLM5000HD Series High-Definition Oscilloscope
The DLM5000HD series sets a new standard for high-definition oscilloscopes.
- 4 or 8 analog channels
- 16-bit logic + optional additional 16-bit logic
- Bandwidth: 350 or 500 MHz
- Sample Rate: up to 2.5 GS/s
- Vertical resolution: 12 bit
- High resolution mode: up to 16 bit
- Measurement memory: up to 1 GigaPoints
- History waveforms: up to 200,000 triggers
- Synchronization function for up to 16 analog channels
- Logic and Serial Bus Analysis
Mixed Signal Oscilloscopes
- Yokogawa mixed signal oscilloscopes
- Simultaneous, time correlated observations
- Analysis of analog with digital (logic) signals
- Troubleshooting electrical anomalies, measuring parametric values, monitoring signals
Osciloscópios
Osciloscópios digitais de classe mundial da Yokogawa: Os osciloscópios digitais têm amostragem de alta velocidade e uma ampla gama de larguras de banda que podem ser utilizadas para projeto e desenvolvimento de dispositivos eletrônicos. As ScopeCorders têm as vantagens de um osciloscópio digital e de um gravador de dados multicanal.