Can the GS610 or GS820 be Used as a DMM to Only Measure Voltage?

Resources:

No, the GS610 and the GS820 cannot be used solely as a DMM to measure only voltage. This is because the Sense terminal cannot be separated from the Output terminal on the instrument. The GS Series uses the Output terminal to source and measure the DUT, it is NOT using the Sense terminal for measurement. The Sense terminal is used only in the case of the 4-wire mode.

In 2-wire mode, the Sense terminal is internally connected to the Output terminal and cannot be used.
In 4-wire mode, the Sense terminal is internally connected to the Output terminal by a 40kΩ resistor.

For the single channel GS610, the Output and Sense terminal must be connected at the same point. For the multi-channel GS820, you can use CH1 and CH2 to measure separate parts of the DUT.

Please refer to the attached PDF for a diagram of the 2-wire and 4-wire connection method.

Produtos e Soluções Relacionadas

GS200 DC Voltage / Current Source

The GS200 DC Voltage/Current Source Pulse Generator from Yokogawa Test&Measurement is a low voltage/current DC source with high accuracy, high stability, and high resolution.

GS610 Source Measure Unit

The GS610 is made up of a programmable current and voltage source, a voltmeter, and an ammeter. Each function can be combined into numerous operation modes.

GS820 Multi Channel Source Measure Unit

Yokogawa source measure unit GS820
Precision SMU quick response for automated testing
High-speed communication improves productivity
Customizable to enable any test

Geradores de Sinal, Fontes Padrão e Fontes de Alimentação

Para aplicações independentes de uso geral ou como componentes principais em um sistema de teste e medição de alta velocidade, as fontes Yokogawa e geradores de sinal são altamente precisos e funcionais.

Source Measure Units

A Source Measurement Unit (SMU) is a flexible test instrument which is capable of both sourcing and measuring voltage and/or current at the same time.