Why is the Displayed Record Length Shorter than the Specified Record Length?
Even though the display record length is shorter than the specified record length, measurement is made over the full record length. There is no function that allows you to move the display position to view the other parts of the waveform that is not displayed. When storing the measured data, the entire record length of data is stored.
If you wish to view the entire record length, please use the Waveform Viewer or Xviewer. The entire record length of measured data can also be output when transferring the data over communications.
For example, if the record length is set to 4 Mpoints, the displayed record length is also 4 Mpoints until the T/DIV is set to 2 mS/div. When the T/div setting is set to 1 mS/div, the display record length becomes 2 Mpoints and the rest of the waveform (2 Mpoints) does not display on the instrument. However, measurements are made for 4 MW of data and is stored. The entire 4 Mpoints of data can be retrieved using the Viewer Software.
Produtos e Soluções Relacionadas
DL7440/DL7480 Digital Oscilloscopes
8-channel 500 MHz oscilloscope with 16 logic inputs, for applications where four channels aren't enough. Support for eight analog channels, 16 bits with 250MHz logic bandwidth, 16MP of recording memory, power analysis, serial bus analysis, and a broad selection of voltage and current probes.
DL9000 DSO Series
500MHz, 1.0GHz, and 1.5GHz DSOs for debug and high performance applications. 10th
generation oscilloscope from Yokogawa with industry leading 2.5 million wfms/sec and lowest dead time. Winner of Test & Measurement World's "Best in Test" award.
DLM2000 Mixed Signal Oscilloscopes
200, 350, and 500MHz mixed-signal oscilloscopes for every engineer. Best-in-class performance in usability, acquisition, analysis, and display—all at a price you can digest. Options include serial bus, vehicle bus, and power supply analysis functions.
DLM6000 MSO & DSO Series
500MHz, 1.0GHz, and 1.5GHz DSO and MSO models for debug, waveform characterization, bench top, or automated test applications. 4 channel models with 16 or 32 logic inputs. 12th generation oscilloscope with ergonomic physical and on-screen improvements.
Mixed Signal Oscilloscopes
- Yokogawa mixed signal oscilloscopes
- Simultaneous, time correlated observations
- Analysis of analog with digital (logic) signals
- Troubleshooting electrical anomalies, measuring parametric values, monitoring signals
Oscilloscopes Application Software
- Yokogawa Test&Measurement oscilloscope application software
- View, export, analyze, and manage data
Osciloscópios
Osciloscópios digitais de classe mundial da Yokogawa: Os osciloscópios digitais têm amostragem de alta velocidade e uma ampla gama de larguras de banda que podem ser utilizadas para projeto e desenvolvimento de dispositivos eletrônicos. As ScopeCorders têm as vantagens de um osciloscópio digital e de um gravador de dados multicanal.