How do I Superimpose a Previous Acquisition Onto my Most Recent Acquisition?

You can superimpose a previous acquisition onto the current acquisition through the Snapshot feature on the DL850. You may also consider using Go/No-Go testing, as long as the requirement for a reference waveform is met.
 
To create a snapshot, please follow the procedures listed below:
  1. Press the FILE key
  2. Press the Others (Save) soft key
  3. Press the Data Type soft key
  4. Select Snap
  5. Press the Execute Save soft key

To load a snapshot, please follow the procedures listed below:

  1. Press the FILE key
  2. Press the Others (Load) soft key
  3. Select the .SNP file
  4. Press the Execute Load soft key

Related Products & Solutions

Data Acquisition (DAQ)

Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.

High Speed Data Acquisition

Yokogawa high speed data acquisition systems deliver industry leading isolation, bit resolution, sampling rate, and memory depth, with independent channel hardware and easy to use software.

Oscilloscopes

World-class digital oscilloscopes from Yokogawa: The digital oscilloscopes have high-speed sampling and a wide range of bandwidths that can be utilized for design and development of electronic devices. The ScopeCorders have the advantages of both a digital oscilloscope and a multi-channel data recorder.

ScopeCorders

A ScopeCorder is an instrument combining a mixed signal oscilloscope and portable data acquisition recorder into a modular platform designed to capture both high-speed transients and low-speed trends. Yokogawa’s ScopeCorder product family provides flexible and high-performance multi-channel test instruments by combining a variety of signal conditioning input modules, onboard calculations, and deep data acquisition storage into an off-the-shelf data acquisition solution.

 
Top