Clamp-on Tester CL130 (ACA, ACV, 600A) (DISCONTINUED)
Notice: This product was discontinued on Oct 31, 2019.
See this replacement product:
- AC current measurement with current ranges up to 600A
- AC voltage and resistance measurements
- 30mm in diameter of measurable conductor
- Mean value display
- Data hold function
- Approved for conformity to safety standards EN61010-1,
- EN61010-2-031, EN61010-2-032 (CAT. Ill 600 V)
| Display (LCD, Digital Counts) | 1999 |
|---|---|
| AC Current Accuracy (200A Reference) | 1.5+6(50/60Hz) 2.0+5(40~1kHz) |
| AC Current Accuracy (600A Reference) | 1.0+3(50/60Hz) 2.0+5(40~1kHz) |
| AC Voltage Accuracy (200V/600V Reference) | 1.0+2(50/60Hz) 1.5+4(40~1kHz) |
| Resistance Accuracy (200Ω reference) | 1.2+4, Beeps at below 30Ω (continuity check) |
| Method of detection | Mean Value |
| Response Time | Approx. 1 seconds (approx. 2 seconds on resistance range) |
| Range Switching | Manual-range |
| Data hold | On all range |
| Operating temperature and humidity | -10-50°C. (no condensation) up to 30°C, 90% RH up to 40°C, 75% RH up to 50°C, 45% RH |
| Influence of external magnetic field | 2A or less at 400A/m |
| Influence of conductor position | ± 2% or less |
| Safety Standard | Conforms EN 61010-1, EN61010-2-031, EN61010-2-032 |
| Circuit voltage | 600Vrms or less |
| Withstanding voltage | 5.55kV AC for one minute |
| Power Supply | 6F22(006P)9Vx1 or 6LR61x2 |
| Battery Life1 | 200 hours |
| Consumed current | Approx. 2mA |
| Auto power-off | Approx. 10 minutes |
| Diameter of measurable conductor | 30mm at maximum |
| Dimensions | Approx. 93(W)x210(H)x40(D)mm |
| Weight (Approx.) | 400g |
| Accessories | Clamp Adapter (Model 99025), Carrying Case (Model 93032), Test Lead (Model 98010), User's manual (IM CL130), batteries |
| Order Notes | Each item selected MUST be ordered as a separate line item. |
| Product Notes | All Clamp-on Meters include Test Leads (where applicable) and a carrying case. |
| AC Current Range | 200/600A |
|---|---|
| AC Current Resolution | 0.1A |
| AC Current Frequency characteristics | 40~1kHz |
| AC Current Method of detection | Mean Value |
| AC Voltage Measurement | O |
| DC Voltage Measurement | - |
| Continuity Check Measurement | O |
| Frequency Measurement | - |
| Temperature Measurement | - |
| Recorder output Function | - |
| Waveform monitor output Function | - |
| Data hold Function | O |
| Auto hold Function | - |
| Peak Hold Function | - |
| Maximum value memory Function | - |
| Mean value display Function | - |
| Filter Function | - |
| Range Hold Function | O |
| Auto ZERO Adjust Function | - |
| Auto power-off Function | - |
일반 페이지
- Clamp-on Testers (1.4 MB)
설명서
- Clamp-on Tester (1.5 MB)
- Clamp Adapter (26 KB)
Drawings
- Clamp-on Tester (143 KB)
Top