Power Consumption Measuring Software

Power Consumption Measuring Software
Now at Yokogawa we have a comprehensive solution with our new standby power consumption measurement software.
Meets the Requirements of IEC62301 Ed2.0(2011) Household electrical appliances - Measurement of standby power and EN 50564:2011 Electrical and electronic household and office equipment – Measurement of low power consumption.
New standby power consumption measurement software that conforms with the testing methods specified in the IEC62301 Ed2.0(2011) standard and EN 50564:2011 has been introduced for the Yokogawa range of digital power analyzers.
The new software, available for the Yokogawa WT3000, WT3000E, WT1800, WT1800E, WT1600, WT210, WT310 and WT310E analyzers, allows the user to perform measurements according to IEC62301 Ed2.0(2011): Household electrical appliances - measurement of standby power and EN 50564:2011 - Electrical and electronic household and office equipment – Measurement of low power consumption.
The software sets up the appropriate test conditions by 3 type measuring mode(Ed1.0/Ed2.0(auto)/Ed2.0(manual), measures the power values, and creates a test report based on the requirements of the IEC62301 Ed2.0(2011) and EN 50564:2011 standards. Key parameters measured and incorporated in the test report include total harmonic distortion(THD measurement), crest factor, RMS voltage, frequency, measurement period and power.

Features and Benefits

By combining the power consumption measuring software with WT3000, WT3000E, WT1800, WT1800E, WT1600, WT210, WT310 and WT310E, you can perform the measurements according to IEC62301 Ed2.0(2011)(Household electrical appliances - Measurement of standby power) and EN 50564:2011 (Electrical and electronic household and office equipment – Measurement of low power consumption).

The software not only inputs the testing conditions and measures the power values, but also make a testing result report based on IEC62301 Ed2.0(2011) and EN50564:2011 standards.

The Power Consumption Measuring Software provides a test report that complies with IEC62301 Ed2.0(2011)/EN 50564:2011

Communication setting and type of information
You need to input model name,manufacture, and finally make report.
 


Measure start

 

Power Analyzer


Trend graph display (when Standard is set to IEC62301 Ed.2 (Auto), EN50564:2011 (Domestic appliance), or EN50564:2011 (Other)).
A trend graph is drawn in conjunction with the starting and stopping of a measurement.

Trend graphs that can be displayed

  • Trend graph of measured data
  • Trend graph of the measured data and judgment data of the stability judgment algorithm (LR, CA, SP1,SP2, SAE)Graph update timing
  • Trend graph of measured data
    Updated in sync with the updating of the displayed numeric data
  • Trend graph of the measured data and judgment data of the stability judgment algorithm
    Updated once every 10 seconds

 

A report of power measurement results can be saved. You can perform measurements that comply with various ratings.

The Test Report provides data for Total Harmonic Distortion(THD), Crest Factor, Voltagerms, Frequency, Time period of measurement and Power.
Report setting

Report of power consumption data

System Requirements

PC

CPU
Pentium4  1.5GHz or higher (recommended)

Memory
512MB or more (recommended)

HDD
500 MB or more of free space

Operating System
Microsoft windows English version, Windows Vista, Windows 7, Windows 8, Windows 8.1 or Windows 10
* 32-bit versions and 64-bit versions are supported.

Communication Port

GP-IB
N.I(National Instruments)
PCI-GPIB or PCI-GPIB+1
PCIe-GPIB or PCIe-GPIB+1

1 On Windows Vista or Windows 7: Use driver NI-488.2 Ver. 2.7.2 or later.
On Windows 8 or Windows 8.1: Use driver NI-488.2 Ver. 3.1.0 or later.

GPIB-USB-HS2
2 On Windows Vista or Windows 7: Use driver NI-488.2 Ver. 2.8.1 or later.
On Windows 8 or Windows 8.1: Use driver NI-488.2 Ver. 3.1.0 or later.

GPIB-USB-HS+3
3 Use driver NI-488.2 Ver. 14.0 or later.

RS-232
An available COM port on the PC

Ethernet
10BASE-T or 100BASE-TX compatible Ethernet port

USB
A USB Rev. 1.1 or later USB port

Display, Printer, and Mouse
Devices supported by the operating systems listed above.

WT Main Unit
Requires harmonic measurement function
For the models that are compatible for communication between the PC and WT when using software

Looking for more information on our people, technology and solutions?


연락처
Top