Korea KR   

MATLAB tool kit for DL series (701991) (DISCONTINUED)

Notice: This product was discontinued on Sep 30, 2018. See this replacement product:
Featured product image

This MATLAB tool kit enables DL and SL series instruments to easily interface with MATLAB. The software can be used to transfer data from DL and SL series instruments to MATLAB via GP-IB, USB or Ethernet.

What's NEW!
MATLAB tool kit (Model: 701991) ver. 2.40 released.
 

Request a Quote
Technical Support
일반 페이지
설명서

When you install this software program, the MEX-Functions for WDF files are installed. The MEX-Functions for WDF files enables MATLAB-characteristic dialog-based programming. The followings are examples of using the MATLAB command window and the MEX-Functions for WDF files in m files.

Example of mexDLGetWave command usage:
Retrieves the measured data and plot them.
Example of mexDLSend command usage:
Sends a message to the device (DL). The device (DL) can be controlled remotely. Also, a data can be received from the device (DL) and imported into MATLAB.
Example of mexWdfScaleDataRead command usage:
Gets the specified channel and physical value block data from the specified WDF file.

The MATLAB tool kit supports the following models.

  • DLM2000 series
  • DLM4000 series
  • DL6000/DLM6000 series
  • DL850 series
  • SL1000

Note:
The mexDLControl command, which starts the DL control window, is not available on and after the Matlab tool kit (701991) version 2.00. Please use Xviewer or Xwirepuller free sotware instead.
The Xviewer and/or Xwirepuller cannot be used together with the MEX-Functions for DL control.
 

Model: 701991
Supported OS: Windows 7 (32bit/64bit), Windows 8/8.1 (32bit/64bit), Windows 10 (32bit/64bit)
Supported MATLAB version: MATLAB R2011b or later
Supported DL (SL) models: DLM2000 series
DLM4000 series
DL6000/DLM6000 series
DL850 series
SL1000


List of Functions (excerpt)

Command Function
Communication configuration related command
mexDLComStart
mexDLComEnd
mexDLSetTimeout
mexDLSetTerm
mexDLSetRen		 Establish connection to the selected DL
Close connection to the selected DL
Set timeout for communication
Set terminator for communication
Set the selected DL to Remote/Local
Status related command
mexDLCheckEnd
mexDLGetLastError		 Check whether or not the message is delivered
Return the number of the last error
Command Receive/Send from DL
mexDLDeviceClear
mexDLSend
mexDLReceive
mexDLGetWave
mexDLGetHistoryWave		 Execute Device clear
Send message to DL
Reveive data from DL
Acquired waveform data from DL
Acquire history data from DL
  • Version 2.40
    • Added support for the following:
      • DL850E/DL850EV/DL350/SL1000  High-Speed 10 MS/s 12 Bit Isolation Module (720250)
      • DL850E/DL850EV/DL350/SL1000  High-Voltage 1 MS/s 16 Bit Isolation Module (with AAF, RMS) (720268)
      • DL850E/DL850EV/DL350/SL1000  Frequency Module (720281)
      • DL850E/DL850EV/DL350/SL1000  Temperature/High-Precision Voltage Isolation Module (Low Noise)(720266)

  • Version 2.30
    • Added support for the following:
      • DL850E/EV/SL1000 High-Speed 100 MS/s 12-Bit Isolation Module (720211)
      • DL850E/EV 4-Ch 1MS/s 16-Bit Isolation Module (720254) and SENT Monitor Module (720243)
      • MATLAB version 2015b (32bit/64bit)
      • Windows 8.1 (32bit/64bit), Windows 10 (32bit/64bit)

  • Version 2.20
    • Added support for the following:
      • DL850E/SL1000 new frequency module (701281)
      • MATLAB version 2014a
      • Receiving DL850E/EV real time calculation channel waveforms
      • Receiving DL850E/EV electrical calculation/harmonic analysis channel waveforms

  • Version 2.10
    • Added support for the following:
      • DL850E/EV
      • MATLAB version 2013b
      • Receiving logic 16-bit option waveforms on DLM4000 Series

  • Version 2.00
    • Added support for the following:
      • MATLAB 64-bit version (works on MATLAB running on both 64-bit and 32-bit Windows operation systems, either Windows 7 or Windows 8)
      • DLM4000 Series Mixed Signal Oscilloscope

  • Version 1.40
    • Added support for the following:
      • MATLAB version 2011b
      • Receiving waveforms on module DL850
      • New feature on DL850 firmware version 2.0
      • New version of DL850 File Access Library
      • New version USB driver (YKMUSB)

  • Version 1.3
    • Added support for the following:
      • SB5000 Series
      • DLM2000 Series
      • DL6000/DLM6000 Series
      • DL850/DL850V
      • MATLAB version 2010b
      • Windows 7
일반 페이지
설명서

Looking for more information on our people, technology and solutions?


연락처

Precision Making

Top