702928 PBD0200 Differential Probe 20 V / 200 MHz
The 702928 Differential Probe delivers accurate differential voltage measurement up to ±20 V with 200 MHz bandwidth, automatic probe interface support, and low noise performance enabling easy automotive bus signal captures.
When connected to DLM3000/3000HD and DLM5000/5000HD series Yokogawa oscilloscopes, the probe is automatically powered, fully recognized, and is configured to prevent setup errors.
The 702928 is ideal for capturing CAN and CAN FD waveforms.
- The 200 MHz bandwidth makes the 702928 ideal for measuring mid- to low-speed differential signals such as CAN and CAN FD. Its ±20 V differential input range, ±60 V maximum input voltage, and low noise performance (4 mV) enable highly accurate floating measurements—even for signals with relatively high common-mode voltages.
- The 702928 is equipped with the YOKOGAWA probe interface, enabling automatic configuration of settings such as attenuation ratio and input impedance simply by connecting them to the DLM series. This eliminates the need for manual adjustments and minimizes the risk of setup errors. The probes are powered directly by the DLM series main unit, so no external power source is required.
| Frequency Band (-3 dB) | DC to 200 MHz |
|---|---|
| Attenuation Ratio | 10:1 |
| DC gain accuracy | ±1% |
| Differential input voltage range (between +/- terminals) |
±20 V (DC + ACpeak) |
| Maximum input voltage (to ground) | ±60 V DC, ±42 V ACpeak |
| CMRR (typical) | -80 dB (60 Hz), -70 dB (100 kHz), -50 dB (10 MHz), -20 dB (100 MHz) |
| Input equivalent noise (typical) | 4 mVrms or less |
| Input capacitance (to ground) (typical) | 2 pF |
| Input resistance (to ground) (typical) | 500 kΩ |
| Output Connector Type | Yokogawa dedicated probe interface |
| Operating temperature range | +5°C to +40°C |
| Operating humidity range | 20% to 80% RH (no condensation) |
| Probe length | Approx. 1.2 m |
| Weight | Approx. 90 g |
Overview:
DLM5000_Simultaneous_analysis_of_eight_CAN_buses
Top