What is the DC Accuracy When the Waveform Position has Been Changed?

Question:
 
What is the DC Accuracy when waveform position has changed?
 
I would like to confirm DC Precision when changing the position setting on DL1600. According to the specification of vertical (voltage) axis accuracy, in the case that voltage axis is set to 0.5 V/div: 
  • DC Precision:  ±(1.5% of 8 div + offset voltage precision)
  • Offset Voltage Precision:   ±(1% of set value + 2 mV)  

If DC offset voltage is set to 2.0 V, then the DC precision is ±(1.5% of  8*0.5V + 1% of 2V + 2 mV) = ±82 mV.
However, there is no description about "position" in this equation. What is the equation when I change the position setting?

For example, what is the DC precision when the offset is set to 0 V and the position is set to -4 div?

Answer:
 
If DC offset equals 0V and the position is changed, it is necessary to calculate the DC precision supposing the DC offset voltage is set as the same as the voltage corresponding to position changing.
 
How to calculate DC offset voltage:
 
Here's how to measure DC offset voltage in the previous example. Since the voltage scale is set to 0.5 V/div, -4 div corresponds to 2V. So the DC precision in this case is the same as the offset voltage is set to 2 V. In conclusion, the DC precision will be:
      ±(1.5% of  8*0.5V + 1% of 4*0.5V + 2 mV)= ±(1.5% of  8*0.5V + 1% of 2V + 2 mV)
    = ±82 mV
 

Related Products & Solutions

DL7440/DL7480 Digital Oscilloscopes

8-channel 500 MHz oscilloscope with 16 logic inputs, for applications where four channels aren't enough.  Support for eight analog channels, 16 bits with 250MHz logic bandwidth, 16MP of recording memory, power analysis, serial bus analysis, and a broad selection of voltage and current probes.

DL9000 DSO Series

500MHz, 1.0GHz, and 1.5GHz DSOs for debug and high performance applications. 10th
generation oscilloscope from Yokogawa with industry leading 2.5 million wfms/sec and lowest dead time. Winner of Test & Measurement World's "Best in Test" award.

DLM2000 Mixed Signal Oscilloscopes

200, 350, and 500MHz mixed-signal oscilloscopes for every engineer. Best-in-class performance in usability, acquisition, analysis, and display—all at a price you can digest. Options include serial bus, vehicle bus, and power supply analysis functions.

DLM6000 MSO & DSO Series

500MHz, 1.0GHz, and 1.5GHz DSO and MSO models for debug, waveform characterization, bench top, or automated test applications. 4 channel models with 16 or 32 logic inputs. 12th generation oscilloscope with ergonomic physical and on-screen improvements.

SL1000 High Channel Count ScopeCorder

A headless ScopeCorder system capable of connecting multiple chassis into one PC-based system.

 

Data Acquisition (DAQ)

Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.

High Speed Data Acquisition

  • Yokogawa high-speed data acquisition systems
  • Industry-leading isolation, bit resolution, sampling rate, and memory depth
  • Independent channel hardware and easy to use software

Mixed Signal Oscilloscopes

  • Yokogawa mixed signal oscilloscopes
  • Simultaneous, time correlated observations
  • Analysis of analog with digital (logic) signals
  • Troubleshooting electrical anomalies, measuring parametric values, monitoring signals

Oscilloscopes

  • Digital oscilloscopes
  • High-speed sampling
  • Range of bandwidths for electronic device design and development
  • Advantages of oscilloscope and multi-channel data recorder

ScopeCorders

  • Flexible, high-performance Yokogawa ScopeCorder
  • Modular platform combines mixed signal oscilloscope and portable data acquisition recorder 
  • Captures high-speed transients and low-speed trends 

 

Precision Making

Top