PSD Switching Measurement with High Definition Oscilloscope
PSD*Switching Measurement with High Definition Oscilloscope
* Power Semiconductor Device
Issue:
The switching loss ("Power" in the example) is calculated by multiplying the output voltage(VDS) and current(Id) in the switching period (turn ON/turn OFF). The ON voltage is only a few volts for an output voltage of several hundred volts, but with a typical 8-bit oscilloscope, this is only 1 to 2 bits of AD resolution, and highly accurate measurements are not possible.
Solution:
The DLM5000HD with 12-bit ADC has 16 times the resolution of conventional 8-bit oscilloscopes, making it ideal for such wide dynamic range measurements. In addition, next-generation devices such as SiC/GaN have a high-speed rising switching voltage, which causes high-voltage ringing, and suppressing it is an important point in designing inverters. High Definition Oscilloscope is also effective for such ringing/noise observations.
Example: SiC MOSFET double pulse test waveform
Related Industries
Related Products & Solutions
701928 Current Probe 100 MHz / 30 ARMS
- 701928 scope current probe
- Front-end powered
- Recognized automatically
- Adjust zero position from operation of DLM2000, DLM3000, DLM4000, DL6000/DLM6000, DL9000/DLM9000. SB5000
702916 Current Probe 120 MHz/ 0.5 ARMS, 5 ARMS, 30 ARMS
Frequency bandwidth: DC to 120 MHz
Maximum continuous input range: 0.5 Arms/5 Arms/30 Arms
Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments
DLM3000HD Series High-Definition Oscilloscope
The DLM3000HD redefines high-definition in a compact design.
- 4 analog channels
- 8-bit logic
- Bandwidth: 350 or 500 MHz
- Sample Rate: up to 2.5 GS/s
- Vertical resolution: 12-bit
- High resolution mode: up to 16-bit
- Measurement memory: up to 1 GigaPoints
- History waveforms: up to 200,000 triggers
- Synchronization function for up to 8 analog channels
- Logic and Serial Bus Analysis
DLM5000HD Series High-Definition Oscilloscope
The DLM5000HD series sets a new standard for high-definition oscilloscopes.
- 4 or 8 analog channels
- 16-bit logic + optional additional 16-bit logic
- Bandwidth: 350 or 500 MHz
- Sample Rate: up to 2.5 GS/s
- Vertical resolution: 12 bit
- High resolution mode: up to 16 bit
- Measurement memory: up to 1 GigaPoints
- History waveforms: up to 200,000 triggers
- Synchronization function for up to 16 analog channels
- Logic and Serial Bus Analysis
High Voltage Differential Probe 701927
- Wide bandwidth, high voltage
- 150 MHz bandwidth
- ±1.4 kV max. differential voltage
- Interface: Yokogawa DLM Series
High Voltage Differential Probe 701978
- Wide bandwidth, high voltage
- 150 MHz bandwidth
- ±1.5 kV max. differential voltage
- Interface: BNC
High Voltage Differential Probe 702921
- Wide bandwidth, high voltage
- 400 MHz bandwidth
- ±1 kV max. differential voltage
- Interface: Yokogawa DLM Series
High Voltage Differential Probe 702922
- Wide bandwidth, high voltage
- 400 MHz bandwidth
- ±2 kV max. differential voltage
- Interface: Yokogawa DLM Series
High Voltage Differential Probe 702923
- Wide bandwidth, high voltage
- 400 MHz bandwidth
- ±1 kV max. differential voltage
- Interface: BNC
High Voltage Differential Probe 702924
- Wide bandwidth, high voltage
- 400 MHz bandwidth
- ±2 kV max. differential voltage
- Interface: BNC
Mixed Signal Oscilloscopes
- Analyze analog and digital signals simultaneously
- Advanced triggering and high-speed waveform capture
- Power analysis, serial bus analysis, & switching loss
Oscilloscopes
Accelerate design and troubleshooting with oscilloscopes that combine high-speed sampling, long record lengths, and mixed-signal analysis. From quick debug to advanced R&D, Yokogawa oscilloscopes help you see deeper, work faster, and design smarter.
