PZ4000 Power Analyzer (DISCONTINUED)

Notice: This product was discontinued on Dec 31, 2012. See this replacement product:

PX8000 Precision Power Scope

This powerful Power Analyzer was designed to help R&D to create a new generation of environmentally friendly products and technologies. It has been developed and produced in our ISO14001 approved facilities, in accordance with YOKOGAWA's "Guidelines for Designing Products for the Environment", and our "Criteria for Environmental Assessment in Product Design". We have adopted these Guidelines and Standards to help protect the Global Environment, consistent with the focus of the Third Conference of the Parties to the United Nations Framework Convention on Climate Change (COP3, Kyoto, December 1997).

The PZ4000 was selected by
TM Magazine for the
Best in Test 1999.

Software

Details
Resources
Documents & Downloads

Details
Resources
Documents & Downloads

Features
Functions
Characteristics
Accessories

Features
Functions
Characteristics
Accessories

Test & Measurement's award recognized the PZ4000 as a powerful analyzer due to these features:

Wide measurement bandwidth (DC, up to 2 MHz).
Accurate capturing of input waveforms using high-speed (maximum 5 MS/s) sampling.
Voltage and current waveform display and analysis functions to enable power calculations on fluctuating inputs.
Harmonic analysis (up to 500th order) and Fast Fourier Transform (FFT) functions to enable high-frequency power spectrum analysis.
Multiple channel, synchronized measurements using multiple units and Master-Slave trigger function simplifies complex investigations.
Environmentally friendly design based on YOKOGAWA's Guidelines for Designing Products for the Environment and Criteria for Environmental Assessment in Product Design.
Sensor input module option enables evaluation of motor efficiency and total efficiency including the motor drive.

Display of Measured Waveforms

Measured voltages and currents are sampled at high speed (maximum 5 MS/s). Power is calculated from the sampled data along with accurately displayed waveforms

Display Examples:

Output signal check for an inverter-driven 3-phase motor
Tm Pz4000 03

Check using zoom function to determine whether pulse waveforms are fully acquired during low-rpm operation
Tm Pz4000 04

Correlate between displayed waveforms and calculated power values.
Waveform displays and calculated values (e.g., power values) are based on sampled data stored in internal memory, so they are correlated with each other.
Check measurement effectiveness easily.
Measured waveforms and calculated values can be checked at the same time to prevent erroneous measurements.
No probe needed for waveform measurements.
Voltage and current waveforms can be measured without using oscilloscope differential probes and current probes. The PZ4000 can make waveform measurements much more accurately than with conventional oscilloscopes.

Wide Bandwidth, HIgh-Precision Measurements

Measurements can be made over a wide frequency range (DC up to 2 MHz), making it possible to measure power loss on electronic components, high-frequency lighting equipment, and other devices.

Display Examples:

Measurements on inverter lighting equipment with a fundamental wave of approximately 50 kHz
Tm Pz4000 05

Loss measurement during high-frequency capacitor driving (500 kHz)
Tm Pz4000 06

High-precision power measurements at high frequency
Waveform displays and calculated values (e.g., power values) are based on sampled data stored in internal memory, so they are correlated with each other.
Lamp current measurement in fluorescent bulbs
With the PZ4000, you can measure the lamp current of fluorescent bulbs using a Delta Computation function. The function computes the difference of the instantaneous values between the output current of electric ballast and a cathode current.
Loss measurement when actual load is applied to electronic components
With the PZ4000, you can measure power loss resulting from actual load applications, instead of evaluating characteristics based on small signals using an LCR meter or an impedance analyzer.
Power measurements on extremely low-frequency signals
Take full advantage of the 4 M word internal memory (optional; enough for 4 million samples) to obtain precise measurements of extremely low-frequency (several mHz) signals.

Dynamic Capturing of Load Fluctuations

Internal memory (maximum 4 M words) stores your measurements. You can calculate and display voltage, current, and power values for specific portions of the total memory (equivalent to 100 k words of data). The display makes it easy to see how the load fluctuates with time.

Display Examples:

Inrush current measurement in an inverter-type cleaner
Tm Pz4000 07

Efficiency evaluation when inverter output is turned on in a cooking machine using induction heating
Tm Pz4000 08

Inrush current and power measurements (at switch-on)
In the past, it was necessary to measure inrush current and power values at power-on using measuring instruments such as oscilloscopes. The PZ4000 performs these measurements much more accurately and greatly simplifies this procedure.
Power measurements in specific states (specific spans in internal memory)
Power measurements on equipment with fluctuating loads are normally obtained by measuring the energy in certain operating patterns over a long time period using an integration function. The average power value is then calculated. In contrast, The PZ4000 lets you make power measurements over a specific period defined by adjustable cursors. This reduces the time required for measurements.

Graphical Power Analysis

The PZ4000 lets you analyze harmonics (up to 500th order) using high-speed sampling. With the FFT calculation function, you can perform spectrum analysis in the high-frequency range (up to 2.5 MHz). Analysis results are displayed on spectrum graphs. In addition, vectors showing the fundamental components of distorted waveforms can be displayed to give a visual presentation of the load balance in a 3-phase power supply system.

Spectrum analysis of current and power in inverter output
Tm Pz4000 09

Fundamental wave vector display in inverter output
Tm Pz4000 10

Distorted wave power spectrum analysis
With the PZ4000, you don't need a frequency analyzer to perform spectrum analysis on the carrier component of an inverter. Up to now, this type of analysis has been difficult. A major advantage with the PZ4000 is that you can input signals directly without using probes. This removes any error due to probe tolerance.
Load balance evaluation for three-phase powered equipment
The vector display using the harmonic analysis function lets you visually know the condition of each phase in a 3-phase circuit equipment. This makes evaluation simpler than when calculations are performed manually based on numerical data.

Frequency characteristcs (voltage and current) Tm Pz4000 11

Frequency characteristics (phase angle and zero power factor)
Tm Pz4000 12

Linearity (current)
Tm Pz4000 13

Stability
Tm Pz4000 14

366921 BNC to Banana-Jack (Female) Adapter 42V

BNC-Banana-jack (female) adapter. Use for circuits having voltage levels no greater than 42 V.

758921 Fork terminal adapter

758921 Fork Terminal Adapters
For fitting a 4mm banana plug to a fork terminal
One black and one red clip
1000 Vrms-CAT II

758922 Small Alligator-Clip Adapter 300V thumbnail

Yokogawa 758929 Alligator Clip Adapter
Rated at 1000V
Attaches to 758917 test leads
Sold in pairs black/red

758931 Screw-Fastened Safety Voltage Terminal Adapter Set thumbnail

701901 BNC to Safety Banana 1.8m Cable, 1:1
1000 Vrms-CAT II, 1.8 m long
Safety BNC(male) to safety banana(female)
701959, 701954, 758921, 758922, 758929

758917 DMM Measurement Lead Set

Set of 0.8m long red and black multimeter test leads
Used in combination with a pair of optional 758922 or 758929 alligator-clip adapters
1000 Vrms, 32 Arms CAT II