Design of buildings and protective structures

Download (870 KB)

Background

In today’s world of civil engineering, the increasing need for strong structures is eminent in the face of environmental impact that can affect the lifespan of the materials used.

Research on steel behavior under stress is undertaken in universities. Researchers perform loading and impact tests on steel structure that reinforces a building and acts as a column.

Challenge

The impact test is one of the testing methods used by researchers to find out the steel condition under stress.

This research needs an instrument that can measure  multiple output signals from various sensors listed below figure at high speed. In addition, it is necessary to measure those different signals at the  same time. The instrument must have the following features and capabilities:

lMeasurement of sensor’s outputs
ØLaser sensors
ØDisplacement sensors
ØLoad cell
ØDisplacement sensors
ØAccelerometer
ØStrain gauge
lMultiple input channels (8 or more)
lHigh sampling speed
lInput signal filtering to reduce high frequency noise
lSignals analysis functions
lLarge capacity memory

Solution and benefit

The DL950 can measure different multiple sensors’ output signals required for this application at the same time and those captured signals can be displayed on one screen.

Multiple measurements with various modules

A single ScopeCorder can measure high-speed signals, acceleration and strain sensor’s signals with corresponding modules.

Long record length

The DL950 has large memory (up to 8G points with /M2 option and 512GB SSD with /ST1 option).

Bandwidth filter

The DL950 has a LPF and digital filter to reduce high frequency noise.

Various analysis functions

There are various functions to help measurement and analysis, for example, zoom, real time math, and FFT.

The IS8000 integrated software supports the DL950 and allows remote monitoring and synchronization of high-speed camera image with data captured by the DL950 for more in-depth analysis of the test conducted.

New Modules

High-speed 200MS/s 14bit Isolated Module 720212

Number of channels: 2

Sample rate: 200MS/s

Bandwidth: DC to 40 MHz

Max. measurement voltage:

1000 V(DC+ACpeak)*

Resolution: 14 bit

4CH 10MS/s 16bit Isolated Module
720256

Number of channels: 4

Sample rate: 10MS/s

Bandwidth: DC to 3 MHz

Max. measurement voltage:

600 V(DC+ACpeak)*

Resolution: 16 bit

*When set 10:1 or use 100:1 probe

 

Related Products & Solutions

DL950 ScopeCorder

The Yokogawa DL950 ScopeCorder captures and analyzes a wide variety of electrical, physical sensor signals, and serial buses. It offers a unique combination of high sampling rates, for a detailed view and long recording times to monitor trends over time.

Data Acquisition (DAQ)

Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.

Oscilloscopes

  • Digital oscilloscopes
  • High-speed sampling
  • Range of bandwidths for electronic device design and development
  • Advantages of oscilloscope and multi-channel data recorder

ScopeCorders

  • Flexible, high-performance Yokogawa ScopeCorder
  • Modular platform combines mixed signal oscilloscope and portable data acquisition recorder 
  • Captures high-speed transients and low-speed trends 

 

Precision Making

Top