Multifunction Calibrator CA150 (Handheld) (DISCONTINUED)

Notice: This product was discontinued on Sep 30, 2020. See this replacement product:

The CA150 Handy Calibrator is a portable, multi-function calibration device that can handle a wide variety of tasks ranging from verifying multimeters, temperature controllers, and freqency meters. It is able to precisely source and measure voltage, current, resistance, pulse and thermoelectromotive force signals, as well as generate specialized outputs such as signal stepping and ramping. The unit can be battery powered for true portability, or connected to an AC outlet. 

Field instruments are seen across all industrial and process control sectors. They ensure plant operation integirty though converting enviromental phenomena such as pressure, sound, temperature, humidity and flow into measurable quantities such as resistance, voltage, and current. These quantities enable large distributed control systems to efficienty monitor these operations. To maintain the reliability of these field instruments, calibration devices are employed. These devices must be portable, accurate, and multi-purpose to handle any situation in harsh field enviroments. Yokogawa's CA150 achives this by its:

Accuracy

  • Fetauring superior source and measurement accuracy, the unit is ideally suited for verifying and calibrating field instruments

Varied Functionality

  • Combined the capabilities of several instruments into one, compact unit
  • Simultaneously source and measure voltage, current, resistance, RTD and thermocouples, and pulse signals
  • Generate test conditions such as output stepping, ramping, and custom test patterns

Ease of use

  • Intuitive controls and a clear display allow your personnel to quickly and effiiciently perform their maintenance duties
  • Portable, light-weight, and battery powered. Take it anywhere in the field 

Specifications - Model CA150

Standard Accessories None
Power Supply 6 AA size alkaline batteries
AC adapter (sold separately)
AC adapter specification: 100 to 240 VAC, 50/60 Hz, 1.4 A
Dedicated NiMH battery (sold separately)
OUTPUT: 12 VDC, 3 A
Auto power-off Approx. 10 minutes; it can be canceled by setting.
Operating Temperature/Humidity Range 0 to 40°C, 20 to 80 % RH (no condensation)
Storage Temperature Range -20 to 60°C 90%RH or less (no condensation)
External Dimensions 251 x 124 x 70 mm
Weight Approx. 1000 g
Conforming Standards Safety Safety EN61010-1
EMC EN 61326 Class B;EN 55011 Class B Group1
EN 61000-3-2; EN 61000-3-3, EN61326

 

Product Overview

Vertical Hand-Held Calibrator Easy-to-hold vertical body is designed to make it intuitively easy to operate, as individual functions are accessed directly by pressing assigned keys.
Using the main body case (model No. 93027) (sold separately), you can hang CA150 to your body or a handrail to keep it handy.
Simultaneous Source and Measurement for Process Devices In conventional calibration applications, multiple devices such as a standard generator, dial resistor and multi-meter were required. Now with a single CA150 unit, it is possible to perform operation check at regular inspection and maintenance of thermocouples, RTDs and instruments, as well as maintenance and equipment diagnosis of process devices such as transmitters, thermostats and signal converters.
Loop Power Supply Function It is possible to measure generated current signals while supplying loop power 24 VDC from a two-wire type transmitter (up to 22 mADC).
Highly Accurate and Multi-Functional Source and Measurement High accuracy: 0.02% for the source unit and 0.02% for the measurement unit
Source and Measurement functions: DCV voltage, DC mA, ohm, frequency and temperature (thermocouple, RTD) and 24 VDC power supply function for transmitters
Output Functions Automatic Output Functions
  • Step sweep function
    This function changes the output in a staircase (step) pattern at fixed intervals.
  • Linear sweep function
    This function increases (or decreases) the output linearly with respect to the generated value.
  • Program sweep function
    This function outputs source setting values stored by the data memory function sequentially in the order they are stored in the memory.
Communication Functions Serial interface RS232 D-Sub 9-pin connector
Memory Function Data can be stored and loaded in setting memory (setting data) and data memory (source/measurement).
  • Setting memory
    This function saves/loads setting conditions.
    Up to 21 data items can be stored. Settings for (source/measurement) functions, ranges, generated values/measured values as well as setting mode conditions can be stored.
  • Data memory
    This function saves source and measure values displayed.
    Up to 100 data items can be stored. Storage date/time, (source/measurement) functions, ranges and generated values/measured values can be stored. Stored data can be checked on the display of the main unit as well as via communication.

98020 Lead cable for source

One set of 1 red and 2 black cables
Length: Approx. 1.7 m

98064 Lead Cables

Alligator clip, CAT I, for controlsignal only (under 70 V)One set of 1 red and 1 black cablesLength: Approx. 1.7m

RD031 Lead cable for measurement

One set of 1 red and 1 black cables
Length: Approx. 1.0 m

739874 AC adapter

Suffix codes Descriptions
-D UL/CSA Standard
-F VDE Standard
-H Chinese Standard
-N Brazilian Standard
-P Korean Standard
-Q BS/Singaporean Standard
-R Australian Standard
-T Taiwanese Standard
-A Argentine Standard

94015 NiMH battery

NiMH battery Dedicated.

99022 Terminal adapter

Used for temperature measurement.

B9108WA RJ sensor

For reference junction compensation.

93026 Carrying case

Lead cables for source/measurement, terminal adapter, 6 spare batteries, fuse, AC adapter and Instruction Manual can be stored.

93027 Main body case

With strap and accessory storage case.

B9108XA Accessory storage case

Lead cables, RJ sensor, etc. can be stored.

Looking for more information on our people, technology and solutions?


연락처

Precision Making

Top