Accessories for digital power analyzers include various voltage and current transformers, clamp-on current probes, and a selection of test leads.
AC/DC current sensors capable of highly accurate measurement starting in DC range.
Industry leading high precision, high current AC/DC split core measurement. Compatible with power analyzers and waveform measurement instruments.
Special AC-Input Clamp-on Probes for Large-current Hot Line Measurement
Current sensor unit accessories for digital power meters and power analyzers.
DC to 100 kHz/1000 a peak guaranteed calibration with power analyzers.
Current Sensor Element
Firmware version 3.01 or later of WT5000 main frame is required.
A Power Module consists of one Voltage Module- Model 760811, and one Current Module- 760812 or 760813.
A Power Module consists of one Voltage Module- Model 760811, and one Current Module- 760812 or 760813.
A Power Module consists of one Voltage Module- Model 760811, and one Current Module- 760812 or 760813.
Sensor and voltage measurement module (up to three modules can be installed) Auxiliary (AUX) module
Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.
Screw-fastened adapters. Two adapters in a set. 1.5 mm Allen Wrench.
BNC-Banana-jack (female) adapter. Use for circuits having voltage levels no greater than 42 V.
For conversion between BNC and female banana plug
Applicable for DL750/DL750P, SL1000 & SL1400.
2 safety terminal - alligator clip adapters (red and black). Rating 1500 V
Female-female type adapters for 5 A element. Black/Red two adapters in a set.
Screw-fastened type adapters for 30 A element. Black/Red two adapters in a set.
2 pieces (red and black) in 1 set
length: 1.00 m
Used in combination with the 701959, 758921, 758922, or 758929
Rating: 1000 V CAT III/19 A
Direct Current Input Cable (with Burden Resistor 2.7 Ohm) for WT1800E /PD2 option.
Direct Current Input Cable (without Burden Resistor) for WT1800E /PD2 option
BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.
Adapter for connecting the current sensor power option (/PD2) of the WT1800R to split core current sensors.
Printer Paper Roll
Thermal paper (10m) for WT1600, WT 1800, WT3000, & WT3000E - 1 roll
A comprehensive review of split core current transformers and explanation of their principles of operation, design considerations, advantages, disadvantages compared to other CT technologies, and applications.
Maximum torque per ampere (MTPA) is an optimization strategy for the control of electric motors and drives that employ field-oriented control (FOC), particularly with electric vehicles (EVs) and industrial automation applications. The goal of MTPA is to achieve the maximum possible torque output from a motor for a given current input.
In this application note you will learn when and how to use different methods to connect a current transformer to a power analyzer.
Maximum power point tracking (MPPT) charge controllers play a crucial role in the optimization of renewable energy system efficiency and performance. Through dynamic tracking of a renewable energy source’s maximum power point, an MPPT controller enables more efficient energy harvesting, faster charging, and adaptability to changing environmental conditions.
The impedance of the 366924 and the 366925 BNC cable is 50 Ω.
The D/A output of the WT230 Power Meter uses a 24-Pin Centronics type connector. For additional informating regarding the 24-Pin Centronics Connector, please refer to the attached PDF and click on the link below.
Although DC power measurements can be fairly straightforward, complexities with AC power measurements arise when dealing with distorted waveforms, fluctuating power factors, and multiple phases, which introduce intricacies that complicate an otherwise simple measurement process.
This on-demand webinar provides an informative dive into the various fundamental aspects of power measurement and includes: