Accessories for digital power analyzers include various voltage and current transformers, clamp-on current probes, and a selection of test leads.
AC/DC current sensors capable of highly accurate measurement starting in DC range.
Current sensor unit accessories for digital power meters and power analyzers.
DC to 100 kHz/1000 a peak guaranteed calibration with power analyzers.
Special AC-Input Clamp-on Probes for Large-current Hot Line Measurement
760901 30A High Accuracy Element. Includes external sensor input.
760902 5A High Accuracy Element. Includes external sensor input.
Direct Current Input Cable (with Burden Resistor 2.7 Ohm) for WT1800E /PD2 option.
Direct Current Input Cable (without Burden Resistor) for WT1800E /PD2 option
Shunt resistor boxes for WT1800E /PD option.
Dedicated Cables for WT1800E /PD option.
A set of 0.8m long red and black test leads, used in combination with a pair of optional 758922 or 758929 alligator-clip adapters.
Adapters for fitting a 4mm banana plug to a fork terminal. Set contains one black and one red clip. 1000 Vrms-CAT II.
Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.
Rated at 1000V. Attaches to the 758917 test leads. Sold in pairs.
Screw-fastened adapters. Two adapters in a set. 1.5 mm Allen Wrench.
Two adapters in a set (spring-hold type).
Two adapters in a set for current input of the PX8000
For connection the external input of the WT3000 to the current sensor.
BNC-Banana-jack (female) adapter. Use for circuits having voltage levels no greater than 42 V.
For conversion between BNC and female banana plug
Applicable for DL750/DL750P, SL1000 & SL1400.
Applicable for DL850 and WT300 series.
BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.
Printer Paper Roll
Thermal paper (10m) for WT1600, WT 1800, WT3000, & WT3000E - 1 roll
2 pieces (red and black) in 1 set.
Length: 1.5 m, Rating: 80 A
2 pieces (red and black) in 1 set
length: 1.00 m
Used in combination with the 701959, 758921, 758922, or 758929
Rating: 1000 V CAT III/19 A
2 voltage output cables (red and black). 1 m. Rating 1500 V
2 safety terminal - alligator clip adapters (red and black). Rating 1500 V
For reference junction compensation sensor. Pt100, 1.95 m
Female-female type adapters for 5 A element. Black/Red two adapters in a set.
Screw-fastened type adapters for 30 A element. Black/Red two adapters in a set.
After a disastrous 2009, the large publicly held test companies enjoyed booming business in 2010.
The Yokogawa WT210 power analyzer was used by "The Tech Report - PC Hardware Explored" to measure power consumption under load for two articles (Intel's Xeon 5600 processors and Nvidia GeForce GTX 480 and 470 graphics processors). The WT210 is a high accuracy power meter that meets with SPEC's approval and integrates seamlessly with the SPECpower_ssj power measurement components.
Clive Davis from Yokogawa's Europe T&M office describes a measurement system for real-time calculations of power and efficient in power electronics devices, and gives some examples.
Hafeez Najumudeen at Yokogawa Europe explores how power measurements are in increasingly vital aid to modern day energy efficiency.
The need for accurate and reliable power measurement is greater than ever before. As the demands of society and its reliance on advanced technology continue to grow, so energy consumption is increasing at a rate that is unsustainable without a significant shift to alternative energy sources - which themselves require the use of new power electronic technology in the form of high-frequency inverters.
Looking for more information on our people, technology and solutions?