Oscilloscopes
- Mixed Signal Oscilloscopes
- ScopeCorders
- Oscilloscopes Application Software
-
Voltage Probes
- 701926 Differential Probe 7000V / 50 MHz
- 701927 Differential Probe 1400V / 150 MHz
- 700924 Differential Probe 1400V / 100 MHz
- 700925 Differential Probe 1000V / 15 MHz
- 701921 Differential Probe 700V / 100 MHz
- 701924 Differential Probe 25V / 1 GHz
- 701922 Differential Probe 20V / 200 MHz
- 701920 Differential Probe 12V / 500 MHz
- 702906 Passive Probe 1000V / 200 MHz
- 701937 Passive probe 600V / 500 MHz
- 701938 Passive Probe 600V / 200 MHz
- 701939 Passive Probe 600V / 500 MHz
- 701940 Passive Probe 600V / 10 MHz
- 701946 Miniature Passive Probe 400V / 500 MHz
- 701944 High Voltage Passive Probe 1000Vrms / 400 MHz
- 701945 High Voltage Passive Probe 1000Vrms / 250 MHz
- 700929 Isolated Passive Probe 1000V / 100 MHz
- 702902 Isolated Passive Probe 1000V / 60 MHz
- 701947 Isolated Probe 1000V / 200 MHz
- 701974 Low Capacitance Probe 5 GHz
- 700939 Active FET Probe 10V / 900 MHz
- Miniature Passive Probe 701941
- 701942 Miniature Passive Probe
- 200 MHz Passive Probe 700960
- 400 MHz Passive Probe 700988
- 701943 PB500 500 MHz passive probe
- Current Probes
- Logic Probes
- Oscilloscope Accessories
- ScopeCorders Accessories
- Touch Screen GP10/GP20
701924 Differential Probe 25V / 1 GHz
The PBDH1000 (701924) is a 25Vp Differential Probe powered by the Yokogawa Probe Interface. This probe can be used only with the Yokogawa DLM2000, DL6000, DLM6000, DL9000, and SB5000 series oscilloscope.
- Bandwidth: DC to 1GHz
- Attenuation ratio: 50:1
- Connector Type: BNC Yokogawa Interface
- Input Resistance: 1MΩ (Ground-level resistance from each input terminal)
- Input Capacitance: 1.1 pF (Ground-referenced capacitance from each input terminal)
- Differential Input Resistance: 2MΩ
- Differential Input Capacitance: 0.6pF
- Max Operating Input Voltage: +/-35V
- Max Differential Input Voltage: +/-25V
- NMax on-Destructive Maximum Input Voltage: +/- 35V (DC + ACpeak, continuous)
- Cable Length: 1.2m
- Standard accessories included: Pair leads, Micro-clips, GND lead, Contact tube, Pin with flange, pins, manual and case. (Robust accessories for the in-vehicle test environment )
- CAN bus
- FLEXRAY bus
- Power Supply Noise Test
- Digital Circuitry Characterization and Test