Oscilloscopes
- Mixed Signal Oscilloscopes
- ScopeCorders
- Oscilloscopes Application Software
-
Voltage Probes
- 701926 Differential Probe 7000V / 50 MHz
- 701927 Differential Probe 1400V / 150 MHz
- 700924 Differential Probe 1400V / 100 MHz
- 700925 Differential Probe 1000V / 15 MHz
- 701921 Differential Probe 700V / 100 MHz
- 701924 Differential Probe 25V / 1 GHz
- 701922 Differential Probe 20V / 200 MHz
- 701920 Differential Probe 12V / 500 MHz
- 702906 Passive Probe 1000V / 200 MHz
- 701939 Passive Probe 600V / 500 MHz
- 701938 Passive Probe 600V / 200 MHz
- 701940 Passive Probe 600V / 10 MHz
- 701946 Miniature Passive Probe 400V / 500 MHz
- 701944 High Voltage Passive Probe 1000Vrms / 400 MHz
- 701945 High Voltage Passive Probe 1000Vrms / 250 MHz
- 700929 Isolated Passive Probe 1000V / 100 MHz
- 702902 Isolated Passive Probe 1000V / 60 MHz
- 701947 Isolated Probe 1000V / 200 MHz
- 701974 Low Capacitance Probe 5 GHz
- 700939 Active FET Probe 10V / 900 MHz
- Miniature Passive Probe 701941
- 701942 Miniature Passive Probe
- 200 MHz Passive Probe 700960
- 400 MHz Passive Probe 700988
- 701943 PB500 500 MHz passive probe
- Current Probes
- Logic Probes
- Oscilloscope Accessories
701947 Isolated Probe 1000V / 200 MHz
Passive Probe, 3540Vp-CAT I, 1000Vp-CAT II, 200MHz, 100:1, 100MΩ, 1.5m, 'Isolated Probe' 'Iso-Probe'. For use with 701250, 701251, 701260, 701280, 701281, 720210 isolated-input modules ONLY. For use with DL850 series, DL750/DL750P, SL1400, and SL1000. Not for use with CAT III or CAT IV measurements
See also:
700929 10:1 1000Vpeak Iso-Probe
M1223WN-A Push-On Large-Jaw Safety Clip (high-side)
M1223WP-A Push-On Male Banana Plug (high-side)
M1223WQ-A Reference Lead & Adaptor (low-side)
M1223WR-A Large Jaw Safety Reference Clip
- Bandwidth: DC to 200MHz (-3dB)
- Attenuation ratio: 100:1
- Connector Type: BNC
- Input Resistance: 100MΩ
- Input Capacitance: 7pF
- Compensation Range:
- Rise Time: 1.2ns
- Maximum input voltage, Space Between Shield and Earth:
- +/-1,000V (DC + ACpeak) CAT II
- +/-1,000V (DC + ACpeak) CAT I
- Maximum input voltage, Space Between Tip and Shield:
- +/-1,000V (DC + ACpeak) CAT II
- +/-3,540V (DC + ACpeak) CAT I
- Cable length: 1.5m
- Standard accessories included: One ach, B8073ZF Safety Plug-On Clip (high-side pincher), and B8074ZG Safety Clip Lead (low-side)
- Safety Rating (Probe Alone): EN61010-031:2002, CAT I and II Only.
Brochures
- Probes and accessories for Oscilloscopes and ScopeCorders (2.5 MB)
- 701947-PMK01E (111 KB)