This software can be utilized for ScopeCorder DL350 data and setup file management by a PC.
This software supports setup operations and on-site tasks of the DL350.
You can use this software to perform the functions listed below.
|Load Setup File||You can directly apply a DL350 setup file stored in the PC to the DL350.|
|DL350 Start/Stop||You can start or stop measurement performed on the DL350.|
|Backup||You can back up the data stored in the SD card or USB memory installed with the DL350 to the PC.|
|Transfer File||You can transfer (copy) files bidirectionally between the DL350 and PC.|
|Edit Setup File||You can edit the DL350 setup file stored in the PC.|
Install this software on a PC having an environment where one of the OSs listed below runs.
Windows 7(32bit/64bit), Windows 8(32bit/64bit), Windows 8.1(32bit/64bit), and Windows 10(32bit/64bit)
|DL350 firmware version||Version of this software|
|1.10 and later||1.10 and later|
|1.01 to 1.02||1.01 to 1.02|
|1.20 and later||1.20 and later|
|1.20 and later||
|1.10 and later||
|1.02 and later||
|1.01 and later||
Please read Software Agreement carefully before downloading.
|Release Date||May 30, 2018|
|File Name||DL350AssistantSoftware_v1.20.zip||13.5 MB|
|Type||Software* Registration is required to download.|
Downloading of the software indicates acceptance of the software agreement.
A ScopeCorder combines the transient signal capturing capabilities of an oscilloscope with the long-term datalogging capabilities of a data recorder.The DL350 ScopeCorder is a portable instrument featuring the deep measurement and recording capabilities you need in the lab in a compact instrument you can take into the field. For “quick and easy” troubleshooting or sophisticated mixed-signal datalogging, the DL350 is a portable, powerful, and useable engineering tool that makes complete measurements completely portable.