OSA: Characterization of Optical Amplifier Gain and Noise Figure
Applicable model*: AQ6380/AQ6370 series/AQ6360
With the increase in communication traffic, the importance of optical amplifiers such as EDFAs (erbium-doped fiber amplifiers) that can directly amplify optical signals without converting them into electrical signals is increasing in backbone optical transmission networks.
The applicable models are equipped as standard with an optical amplifier analysis function (EDFA-NF) that automatically calculates the gain and noise figure (NF) of the optical amplifier from the input and output optical spectrum of the optical amplifier.
Since the Amplified Spontaneous Emission (ASE) generated by the optical amplifier is superimposed on the output light of the optical amplifier, it is important to measure this noise component separately in optical amplifier evaluation. The optical amplifier analysis function identifies the ASE component by the curve fitting and interpolation method. In addition, the curve fitting method and analysis conditions can be set according to the actual spectrum, so the gain and NF can be obtained accurately.
* All versions unless otherwise specified.
AQ6373 family are not applicable.
|
|
|
nCalculate the gain and NF for each channel of the input optical signal.
(Compatible with DWDM signals.) nAnalysis results such as wavelength, gain, and NF are displayed in a list or graph for each channel.
nPossible to set analysis parameters such as channel detection and ASE level detection
|
Related Products & Solutions
AQ6360 Telecom Production 1200 - 1650 nm
- AQ6360 optical analyzer
- Cost-effective optical spectrum analyzer
- Diffraction grating technology
- Ideal for optical device manufacturing
AQ6370 Optical Spectrum Analyzer
- Yokogawa AQ6370 Optical Spectrum Analyzer
- Re-defining Optical Spectrum Measurement Excellence
AQ6370B Optical Spectrum Analyzer
High performance with a 20 picometer wavelength resolution supporting 25 GHz DWDM spacing and 40G/100G applications, this OSA also supports non-Telecom applications with a wavelength range from 600nm to 1700nm.
AQ6370C Optical Spectrum Analyzer
Popular TELECOM wavelength Range of 600nm to1700nm makes this an ideal model for Telecommunications applications for both single-mode and multi-mode optics.
New for 2010 includes both High Performance and Standard Performance versions.
AQ6370D Telecom Optical Spectrum Analyzer 600 - 1700 nm
- AQ6370D Optical Spectrum Analyzer
- Popular TELECOM wavelength Range of 600nm to1700nm
- Ideal model for Telecommunications applications for single-mode and multi-mode optics
AQ6370E Telecom 600 - 1700 nm
- AQ6370E Optical Spectrum Analyzer
- Popular TELECOM wavelength Range of 600nm to1700nm
- Ideal model for Telecommunications applications for single-mode and multi-mode optics
AQ6373E Visible Wavelength 350 - 1200 nm
- The high-performance optical spectrum analyzer optimized for visible laser measurement
- 3 models line up for various applications [Standard, High resolution, Limited]
- Ideal for the lasers of industrial, bio and medical
AQ6374 Wide Range Optical Spectrum Analyzer 350 – 1750 nm
- AQ6374 Wide Range Optical Spectrum Analyzer
- Covers wavelengths from 350 to 1750 nm i
- Visible lights (380 to 780 nm) and telecommunication wavelengths
AQ6374E Wide Wavelength Range 350 - 1750 nm
- Wide range optical spectrum analyzer covering from visible light to communications wavelength
- Wide wavelength range: 350 to 1750 nm
- Ideal for various applications including fiber
AQ6375B Long Wavelength Optical Spectrum Analyzer 1200 - 2400 nm
High Performance LONG WAVELENGTH
The AQ6375B is a bench-top optical spectrum analyzer covering the long wavelengths, 1200 to 2400 nm, with the added benefits of gas purging input ports / output ports, a built-in cut filter for high order diffracted light, and a novel double speed mode which increases the sweep speed up to 2 times compared to the standard sweep mode.
AQ6375E Long Wavelength 1200 to 2400 nm and 1000 to 2500 nm
High Performance LONG WAVELENGTH
The AQ6375E covers not only telecommunication wavelengths, but also the SWIR region which is often used for environmental sensing and medical applications.
・Lineup of 3 models [Standard, Extended and Limited]
・Covers wavelengths
1200 to 2400 nm [Standard, and Limited]
1000 to 2500 nm [Extended ]
AQ6376 Three Micron Optical Spectrum Analyzer 1500 - 3400 nm
MWIR WAVELENGTH with internal gas purge and cut filter
The AQ6376 is the latest version of our bench-top optical spectrum analyzer extending the wavelength coverage well beyond the NIR range of our previous models into the MWIR region from 1500 to 3400 nm.
Popular applications include the detection of gases such as carbon oxides (COx), nitrogen oxides (NOx), and hydrocarbon gas (CxHy) for environmental studies.
AQ6376E Three Micron 1500 - 3400 nm
MWIR WAVELENGTH with internal gas purge and cut filter
The AQ6376E is the latest version of our bench-top optical spectrum analyzer extending the wavelength coverage well beyond the NIR range of our previous models into the MWIR region from 1500 to 3400 nm.
Popular applications include the detection of gases such as carbon oxides (COx), nitrogen oxides (NOx), and hydrocarbon gas (CxHy) for environmental studies.
AQ6377 Five Micron 1900 - 5500 nm
- AQ6377 long-wavelength optical spectrum analyzer model covering the MWIR region over 5 μm
- AQ6370D optical analyzer model with highest resolution (up to 20 pm)
- Highest close-in dynamic (up to 78 dB)
- Widest measurement power (up to 110 dB)
AQ6380 Highest Performance Optical Spectrum Analyzer 1200 - 1650 nm
AQ6380 OSA: 5 pm high wavelength resolution, ±5 pm accuracy, 65 dB wide close-in dynamic range, 80 dB high stray light suppression
Long Wavelength Optical Spectrum Analyzer AQ6375
Unique LONG wavelength range of 1200 to 2400 nm makes this the world's first and only OSA specifically designed for use in advance applications such as Carbon Monoxide (CO), Carbon Dioxide (CO2) gas detection and LIDAR.
Optical Spectrum Analyzer
- Optical Spectrum Analyzer to measure and display power distribution of an optical source
- Optical analyzer trace displays power in vertical scale and wavelength in horizontal scale
Optical Test Equipment
- Yokogawa optical test equipment solutions to measure optical components/systems
- Serves demand for high capacity fiber lines and new component technologies