Saved DL850 ScopeCorder Files Won't Refresh in Windows When USB is Set to Storage Mode
Resources:
If the files saved on the DL850 ScopeCorder do not appear on the PC, please disconnect and reconnect the USB connection from the DL850 to the PC.
This behavior is normal for Windows based operating systems including Windows XP, Windows Vista, and Windows 7. When the DL850 is connected to a Windows OS PC, the Windows OS thinks that the removable disk can only be accessed by itself. Any other OS will be ignored by the Windows OS.
As a result, when you first connect the instrument to the PC via USB connection, the Windows OS will catalog and index existing files on the DL850 HDD. Any new files that are stored onto the removable disk will not be detected by the Windows OS. There is no current solution to this detection issue, as it is a Windows phenomenon.
Also, please make note of the following:
This behavior is normal for Windows based operating systems including Windows XP, Windows Vista, and Windows 7. When the DL850 is connected to a Windows OS PC, the Windows OS thinks that the removable disk can only be accessed by itself. Any other OS will be ignored by the Windows OS.
As a result, when you first connect the instrument to the PC via USB connection, the Windows OS will catalog and index existing files on the DL850 HDD. Any new files that are stored onto the removable disk will not be detected by the Windows OS. There is no current solution to this detection issue, as it is a Windows phenomenon.
Also, please make note of the following:
- Never access the DL850/DL850V internal hard disk from the DL850/DL850V menu when USB Function is set to Storage
- When you access the internal hard disk of the DL850/DL850V from a PC, only perform read operation. Doing otherwise may damage the DL850/DL850V
Related Products & Solutions
Data Acquisition (DAQ)
Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.
High Speed Data Acquisition
- Yokogawa high-speed data acquisition systems
- Industry-leading isolation, bit resolution, sampling rate, and memory depth
- Independent channel hardware and easy to use software
Oscilloscopes
- Digital oscilloscopes
- High-speed sampling
- Range of bandwidths for electronic device design and development
- Advantages of oscilloscope and multi-channel data recorder
ScopeCorders
- Flexible, high-performance Yokogawa ScopeCorder
- Modular platform combines mixed signal oscilloscope and portable data acquisition recorder
- Captures high-speed transients and low-speed trends
Top
