WT210/WT230 Digital Power Meters (DISCONTINUED)

Wide Frequency Range

Wide Frequency Range Lets You Work on a Variety of Different Applications

• Low-frequency Equipment
• Low-frequency measurements starting at 0.5 Hz can be used for evaluations of cycloconverters and when a motor are started.




 
•  
•  

• Commercial Power Supplies
• Basic Power Accuracy: 0.1%
  Power accuracy is even better than in fomer WT200/WT130 series.




 
•  
•  

• Inverters
• 100 kHz power frequency range
  Now you can obtain more precise measurements on high-frequency equipment such as inverters.





 
•  
•  

Accuracy Is Assured Between 1% and 130%

Capture a Variety of Signal Types

 

Surge Current and Maximum Load State

MAX Hold Function for Voltage, Current, and Power *3
This function lets you keep, on the display, voltage and current peak values, voltage and current rms values, and maximum values for active power, apparent power, and reactive power.

 

 

 

 

Half-wave Rectification, Intermittent Control, Distortion Waves

Measurement of DC Components
In addition to using DC inputs, you can obtain precise measurements of signals containing DC components, such as intermittent signals and half-wave rectification signals.

 

 

 

 

 

Constantly Changing Signals

Quick Response with Display Updating as Fast as Every 0.1 Second
With measurement intervals as short as 0.1 second, you can capture transient phenomena with a fine level of detail. You can also reduce the time per measurement for increased through put in production testing.

 

 

 

 

 

Noisy Signals

Line Filter Function (fc = 500 Hz)
This function lets you measure fundamental wave rms values for inverter output voltages.

 

 

 

 

 

 

Instead of taking notes, you can use the internal memory to store and recall settings and field measurement data.

*3: Popular functions on the WT200 were incorporated into WT210 and WT230.

 

 

 

 

 

Powerful Tools for Energy Measurement

 

 

Extended Energy Measurement Applications

Maximum Integration Time: 10,000 hours3
Time can be set between 1 second and 10,000 hours (416 days) in 1-second increments.

 

 

 

Battery Equipment Applications

Integrating Power Measurement by Polarity
Power and current values can be integrated separately for positive and negative polarities. Integrated values are shown with the decimal point moving according to the integrated value.

 

 

 

 

 

Intermittent Control Equipment Applications

Average active power display³

 

 

 

The power of intermittent control equipment changes significantly over time. The average active power in intermittent operations can be displayed, which is highly effective for consumed-power measurements.

3: Popular functions on the WT200 were incorporated into WT210 and WT230

 

 

 

Rear Panel

 

 

 

 

 

 

One Unit Handles Standby Low-power Measurements (WT210 only)

Wide Range of 5 mA to 20 A
The built-in 5 mA range lets you measure currents as low as 25 µA. This makes it possible to measure very low currents on such things as intermittent control equipment. The wide current range (5 mA to 20 A) means a single power meter can be used for applications such as Energy Star® measurements, to measure everything from standby-power to rated-power.

 

 

 

 

 

 

 

Benefit of Assured Accuracy from 1% of Rng

Assured accuracy from 1% allows measurement of widely-varying power consumption with a fixed range.

 

 

 

 

---

 

Comparision with Former Models

	WT200/WT130	WT210/230
Voltage input terminal	Bindging Post	Plug-in terminal (safety terminal)
External input terminal	Plug-in terminal (safety terminal)	BNC
Voltage and current basic accuracy	0.25% of rng	0.2% of rng
Power basic accuracy	0.3% of rng (WT200) 0.35% of rng (WT130)	0.2% of rng
Frequency range	DC, 10 Hz to 20 kHz	DC, 0.5 Hz to 100 kHz
Assured accuracy range	10% to 130% of range rating	1% to 130% of range rating
Display updating interval	0.25 second (fixed)	0.1/0.25/0.5/1/2/5 seconds
V, A, W display digits	4 digits (WT130) 5 digits (WT200)	5 digits
Line filter function	No	Yes (fc = 500 Hz)
Frequency filter function	Yes (fc = 300 Hz)	Yes (fc = 500 Hz)
Key lock	No	Yes
Harmonic measurement display updating interval	Approximately 3 seconds	0.25/0.5/1/2/5 seconds
Remote signals when comparator is installed	EXT HOLD and EXT TRIG are added. EXT START, EXT STOP, EXT RESET, and INTEG BUSY are not added.	All six signals listed to the left are added. Pin assign is changed.
Online data format	ASCII	ASCII, binary
Waveform data communications output	No	Yes (need /HRM)
Addressable mode B for GP-IB communications	Yes	No
Display digits (factory default)	4 digits	5 digits
Online output data digits (factory default)	4 digits	5 digits

Functions Included with the WT200 (but Not Included with the WT130) and Included with the WT210/WT230

 

• MAX hold function
• Moving decimal point display based on integrated power value
• 10,000-hour maximum integration time
• Integration with few data omissions
• Average active power display

 

Model	Description
760401	WT210 single-input element model
760502	WT230 2-input element model
760503	WT230 3-input element model