DL850 Time/Div Data Querying API Using Excel via USB Connection

The attached file contains an Excel spreadsheet with an API that will query data from the DL850 via USB, to obtain and display the Time/Div setting.

To use the Excel API, follow these procedures:
  1. Download and extract the folder to the destination of your choice
  2. Click on the link below and install the Yokogawa USB Drivers if not already installed
    https://y-link.yokogawa.com/YL008.po?V_ope_type=Show&Download_id=DL00002094&Language_id=EN
  3. Connect the USB cable from the instrument to the PC
  4. Open the file "Sample-USB DL850.xls"
  5. Enter the DL850 Serial Number
  6. Click on Communication Check
  7. Click on Query T/Div to retrieve data

Related Products & Solutions

Data Acquisition (DAQ)

Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.

High Speed Data Acquisition

Yokogawa high speed data acquisition systems deliver industry leading isolation, bit resolution, sampling rate, and memory depth, with independent channel hardware and easy to use software.

Oscilloscopes

World-class digital oscilloscopes from Yokogawa: The digital oscilloscopes have high-speed sampling and a wide range of bandwidths that can be utilized for design and development of electronic devices. The ScopeCorders have the advantages of both a digital oscilloscope and a multi-channel data recorder.

ScopeCorders

A ScopeCorder is an instrument combining a mixed signal oscilloscope and portable data acquisition recorder into a modular platform designed to capture both high-speed transients and low-speed trends. Yokogawa’s ScopeCorder product family provides flexible and high-performance multi-channel test instruments by combining a variety of signal conditioning input modules, onboard calculations, and deep data acquisition storage into an off-the-shelf data acquisition solution.

Top