Error(Code:539) Occurs When Loading *.WDF Files to the DL850
Resources:
|
Error(Code:539) Press ESC Key to Close. Module configuration is not matched, |
The following error is encountered when the end-user attempts to re-load a *.WDF file to the display/acquisition memory from media and the module is installed in the incorrect slot.
This error can be corrected by the following procedures:
1. Press the FILE key
2. Press the Utility soft button
3. Highlight the file and select File Property
4. Install the modules in the correct slots according to the File Property information
Related Products & Solutions
Data Acquisition (DAQ)
Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.
High Speed Data Acquisition
Yokogawa high speed data acquisition systems deliver industry leading isolation, bit resolution, sampling rate, and memory depth, with independent channel hardware and easy to use software.
Oscilloscopes
World-class digital oscilloscopes from Yokogawa: The digital oscilloscopes have high-speed sampling and a wide range of bandwidths that can be utilized for design and development of electronic devices. The ScopeCorders have the advantages of both a digital oscilloscope and a multi-channel data recorder.
ScopeCorders
A ScopeCorder is an instrument combining a mixed signal oscilloscope and portable data acquisition recorder into a modular platform designed to capture both high-speed transients and low-speed trends. Yokogawa’s ScopeCorder product family provides flexible and high-performance multi-channel test instruments by combining a variety of signal conditioning input modules, onboard calculations, and deep data acquisition storage into an off-the-shelf data acquisition solution.