701920 Differential Probe 12V / 500 MHz - Oscilloscope Differential Probe (DISCONTINUED)
|
Bandwidth |
: |
DC to 500 MHz |
|
Attenuation |
: |
10:1 |
|
Max. Input Voltage:(to ground) |
: |
±40 V (DC + AC peak) |
|
Max. Differential Voltage |
: |
±12 V (DC + ACpeak) |
|
Probe Power: probe power supply |
||
What is a Differential Probe?
Differential oscilloscope probes are designed to obtain differential signals between two test points while rejecting common mode signals. Differential probes are commonly used to measure high-frequency and low amplitude signals.
How to Use a Differential Probe
1. Connect this probe’s power supply cable to the probe power supply connector on the DL series instrument, 700938, or 701934.
2. Simply plug-in the BNC output connector to the vertical input of a oscilloscope. In this case, set the input resistance of the oscilloscope to 50 Ω.
3. Using the appropriate probe accessories, connect the input to the circuits under measurement.
- Bandwidth: 500Hz
- Attenuation ratio: 10:1
- Connector Type: BNC Yokogawa Interface
- Input Resistance: 100kΩ (Ground-level resistance from each input terminal)
- Input Capacitance: 2.5pF (Ground-referenced capacitance from each input terminal)
- Rise Time: not specified
- Differential Input Voltage Range: +/-12V
- Common Mode Input Voltage Range: +/-30V
- Non-Destructive Input Voltage: +/- 30V (DC + ACpeak)
- CMRR: -60dB 1MHz, -17dB 500MHz
- Cable Length: 1.2m probe cable, 1m power lead cable
- Standard accessories included: Straight & Angle Pins, Microclips, Lead Wires, pinchers, adaptors