DL1720E/DL1740E/DL1740EL Digital Oscilloscopes (DISCONTINUED)

Three pockets are provided for storing accessories and the user’s manual.

• Differential oscilloscope probe
• 100 MHz
• ±1400 V (DC + ACpeak) at 1000:1
• Internal battery or probe power supply
• Oscilloscopes, ScopeCorders

Works with Oscilloscopes, ScopeCorders. 15 MHz, 100:1/10:1, Max. Differential Voltage: ±500 V (DC + ACpeak) or 350 Vrms at 100:1 attenuation, Probe Power: Internal battery or probe power supply.

• 700939 Active FET Probe
• 900 MHz Active FET Probe Circuit
• 10:1, ±10 V (DC + ACpeak) FET Input Active Probe
• 1.5 m

400 MHz, 10:1/1:1, 600 V (DC + ACpeak) or 424 Vrms CAT II, 1.5 m For DL1700, DL1700E, DL7200, DL7400 series

• 701920 Oscilloscope Differential Probe
• DC to 500 MHz
• 10:1
• Max. Input Voltage:(to ground) ±40 V (DC + AC peak)
• Max. Differential Voltage ±12 V (DC + ACpeak)
• Probe power supply
• 50 Ω input system oscilloscope

50 MHz, 1000:1/100:1, Max. Differential Voltage: 5000 Vrms/7000 Vpeak (1000:1), Probe Power: Internal battery or probe power supply B9852MJ power cable is bundled Work with Oscilloscopes, ScopeCorders

• 701930 Current Probe 10 MHz / 150 ARMS
• Powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply

• 701931 Current Probe 2 MHz / 500 ARMS
• Powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply

• 701932 Current Probe 100 MHz / 30 ARMS
• Powered by Yokogawa Digital Oscilloscopes, Scopecorders, or external power supply

• 701933 50 by 30 current probe
• Powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply

500 MHz, 10:1, 400 Vrms, 1250 V transient over-voltage CAT I, 300 Vrms CAT II, 1.2 m
For DL1700E, DL7400 series

350 MHz, 10:1, 400 Vrms, 1250 V transient over-voltage CAT I, 300 Vrms CAT II, 3 m
For DL1700E, DL7400 series

• 701944 High Voltage Passive Probe 1000Vrms / 400 MHz
• For DL1700, DLM2000-6000, DL6000, DL9000, SB5000 series

• 3m High Voltage Probe (oscilloscope)
• DC to 250 MHz bandwidth 
• 100:1 attenuation 
• Max Input 1000 Vrms CAT II 4000 V transient over-voltage CAT I

• 366924 BNC to BNC cable for oscilloscope 
• 1m BNC wire
• Simultaneous measurement with 2 units
• Input external trigger signal

BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.

• B9852MJ power probe extension cable
• Supplies power to 700924, 700925, and 701921 differential probes from the DL probe power connectors
• Required on DL unit
• Only works with newer probes

T-adapter for BNC connectors. Use for circuits having voltage levels no greater than 42 V.

• 701919 oscilloscope probe stand
• Flexible arm, heavy base to hold and stabilize 8-13mm probes
• Can simplify circuit board testing

For the DL1600,1700E series