VOLTAGE PROBES

An oscilloscope is only as good as its probes. Our range includes high voltage, differential, active, low capacitance, and passive types, with ranges to 30kV and frequency bandwidths to 5 GHz.

Differential Probe 150 MHz/1400 V 701927

Differential Probe 150 MHz/1400 V 701927

The 701927 is a 50:1 or 500:1 high voltage (1400V peak) probe with extended bandwidth covering DC to 150MHz, This probe provides a balanced differential input, to be used with oscilloscopes with single-ended inputs (1 MΩ Input Impedance).  This probe works with DLM2000, DLM4000, DL6000, DLM6000, DL9000 and SB5000. This probe is conveniently powered by the Yokogawa Probe Interface.

Differential Probe 100 MHz/1400 V 700924

Differential Probe 100 MHz/1400 V 700924

Differential probe powered by Yokogawa Digital Oscilloscopes, ScopeCorders, external power supply or internal battery.

Differential Probe 50 MHz/7000 V 701926

Differential Probe 50 MHz/7000 V 701926

High Voltage Differential probe powered by Yokogawa Digital Oscilloscopes, ScopeCorders, external power supply or internal battery.

Differential Probe 15 MHz/1000 V 700925

Differential Probe 15 MHz/1000 V 700925

Differential probe powered by internal battery.

500 MHz Differential Probe 701920

500 MHz Differential Probe 701920

Differential Probe, 12Vp Differential, 30Vp Common-Mode, 500MHz, 10:1, 100kΩ, w/ built-in power cable (LEMO lead)

100 MHz Differential Probe 701921

100 MHz Differential Probe 701921

Bandwidth: DC to 100 MHz (-3 dB)

200 MHz Differential Probe 701922

200 MHz Differential Probe 701922

The 701922 is a 10:1 Differential Probe rated at 20Vpeak differential voltage input and 60Vpeak Common-Mode input with 200MHz bandwidth (-3dB). This probe is recommended for CAN bus and can be used with virtuallly any oscillscope with an internal 50Ω termination or use the external 50Ω 700976. This probe is powered via a built in pig-tail LEMO lead. This probe can be powered with Yokogawa scope option /P2 or /P4, or an external power supply 700938-3-D or 701934-D. The probe is supplied with one each pinchers, B9852MF black and B9852MG red and a 50cm ground extension.

2.0 GHz Differential Probe (PBD2000) 701923

2.0 GHz Differential Probe (PBD2000) 701923

PBD2000 Differential Probe, 5Vp Differential, 7Vp Common-Mode, 2GHz, 10:1, 50kΩ

1.0 GHz Differential Probe (PBDH1000) 701924

1.0 GHz Differential Probe (PBDH1000) 701924

The PBDH1000 (701924) is a 25Vp Differential Probe powered by the Yokogawa Probe Interface. This probe can be used only with the Yokogawa DLM2000, DL6000, DLM6000, DL9000, and SB5000 series oscilloscope. 

200 MHz Passive Probe 701938

200 MHz Passive Probe 701938

Passive Probe, 600Vp, 200MHz, 10:1, 10MΩ, 1.5m
Supplied standard with DLM2000/DLM4000.

500 MHz Passive Probe 701939

500 MHz Passive Probe 701939

Passive Probe, 600Vp, 500MHz, 10:1, 10MΩ, 1.3m
Supplied standard with DLM2000/DLM4000.

Miniature Passive Probe 701946

Miniature Passive Probe 701946

Passive Probe, 400Vrms, 500MHz, 10:1, 10MΩ, 1.3m, 'Miniature Passive Probe' w/ accy kit.
Optional probe for DLM2000/DLM4000/DL6000/DLM6000/DL9000/SB5000 series.

Can also be ordered as a substitute for the standard probe when ordering DLM2000/DL6000/DLM6000.

Miniature Passive Probe 701941

Miniature Passive Probe 701941

Passive Probe, 400Vrms, 500MHz, 10:1, 10MΩ, 1.2m, 'Mini'
Typically used with DL1700 and DL7400 as an optional non-standard probe.

Miniature Passive Probe 701942

Miniature Passive Probe 701942

Passive Probe, 400Vrms, 350MHz, 10:1, 10MΩ, 3.0m, 'Mini'
Optional probe for use with DL1600/DL1700/DL7400 series, see also 701941.

10:1 Passive Probe (Wide operating temperature range for isolated BNC) 702902

10:1 Passive Probe (Wide operating temperature range for isolated BNC) 702902

Passive Probe, 1000V(DC+ACpeak) CAT II, 60MHz, 10:1, 10MΩ, 2.5m
Wide operating temperature range(-40 to 85°C)
For isolated BNC input modules for ScopeCoder series

10:1 Passive Probe(Wide operating temperature range for non-isolated BNC) 702906

10:1 Passive Probe(Wide operating temperature range for non-isolated BNC) 702906

Passive Probe, 1000V(DC+ACpeak) CAT II, 200MHz, 10:1, 10MΩ, 2.5m
Wide operating temperature range(-40 to 85°C)
For DLM2000 and DLM4000 series

100:1 Probe 701944

100:1 Probe 701944

Passive Probe, 1000Vrms, 400MHz, 100:1, 50MΩ, 1.2m, 'Mini'
For DL1700, DLM2000, DLM4000, DL/DLM6000,DL9000 and SB5000.
See also 701945 for 250 MHz version of this same probe.

100:1 Probe 701945

100:1 Probe 701945

Passive Probe, 1000Vrms, 250MHz, 100:1, 50MΩ, 3.0m, 'Mini' with extra-long 3m lead.  Compatible with DL1700, DLM2000, DLM4000, DL/DLM6000, DL9000 and SB5000. See also 701944 for 400 MHz version of this same probe.

100:1 Isolated Probe 701947

100:1 Isolated Probe 701947

Passive Probe, 3540Vp-CAT I, 1000Vp-CAT II, 200MHz, 100:1, 100MΩ, 1.5m, 'Isolated Probe'  'Iso-Probe'

PBA1000 1.0 GHz active probe

PBA1000 1.0 GHz active probe

Use this 10:1 active probe with the DL6054,  DLM6054, DL9040/DL9040L , DL9505L/DL9705L,  DLM2052/DLM2054 series to realize system measurements up to 500 MHz BW.


PBA1500 (701914) 1.5 GHz active probe

PBA1500 (701914) 1.5 GHz active probe

Use this 10:1 active probe with the DL6104,  DLM6104, DL9140/DL9140L , DL9510L/DL9710L, SB5000 series to realize system measurements up to 1.0 GHz BW.


PBA2500 (701913) 2.5 GHz active probe

PBA2500 (701913) 2.5 GHz active probe

Use this 10:1 active probe with the DL6154, DL9240 series to realize system measurements up to 1.5 GHz BW.


PBL5000 (701974)  5 GHz low capacitance probe

PBL5000 (701974) 5 GHz low capacitance probe

The PBL5000 low-capacitance "transmission line" probe (passive) features both 10:1 and 20:1 attenuation.



10 MHz Passive Probe 701940

10 MHz Passive Probe 701940

Passive Probe, 600Vp, 6MHz/10MHz, 1:1, 10:1, 1MΩ/10MΩ, 1.5m '600V Non-Isolated'

200 MHz Passive Probe 700960

200 MHz Passive Probe 700960

Passive Probe, 600Vp, 200MHz, 1:1 & 10:1 switchable, 1MΩ/10MΩ, 1.5m,
This is the standard passive probe included with a DL1600.

400 MHz Passive Probe 700988

400 MHz Passive Probe 700988

A 400 MHz passive probe designed for the DL1700E series, and DL7400 series SignalExplorers with switchable attenuation ratio of 1/10 and 1/1.

PB500 500 MHz passive probe (701943)

PB500 500 MHz passive probe (701943)

Passive Probe, 'PB500', 600Vp, 500MHz, 10:1, 10MΩ, 1.5m
Supplied standard with DL9000/SB5000.

10:1 Probe 700929

10:1 Probe 700929

Passive Probe, 1000Vp CAT II, 100MHz, 10:1, 10MΩ, 1.5m, Isolated Probe, Iso-Probe
Please see also 701947 & accessories.

900 MHz FET probe 700939

900 MHz FET probe 700939

Active Probe, 10Vp, 900MHz, 10:1, 2.5MΩ / 1.8pF, 1.5m, FET Probe w/ LEMO power pig-tail


All Products Guide
All Products Guide
PDF (10.26 MB)
CALL TOLL-FREE AT
1-800-888-6400
(8:00 TO 17:00 EASTERN)
y-Link