技术与服务热线:400 820 0372

中国CN  

How do I Calculate Channel to Channel Skew on the DLM2000 Series Oscilloscope?

The rated specification for channel to channel skew on the DLM2000 is 1 ns or less, where 1 ns typically denotes the worst case scenario.

To measure channel to channel skew on the DLM2000 series oscilloscope, you will need to verify the test conditions for both channels are the same. This means using the same probe type, the same input device, and sampling both channels at the same rate.

For a simple method on how to measure channel to channel skew, follow the procedures listed below:
  1. Use a Function Generator as the input device and output a 1MHz, 500mVpp, Pulse wave
  2. Connect the output of the Function Generator to a Power Divider
  3. Connect the output of the Power Divider to CH1 and CH2 on the DLM2000 (Setup should now look the same as the attached JPEG)
  4. Set the DLM2000 to 100 mV/div, Sampling Mode Repetitive, Average Mode, Count 16
  5. Set the Trigger Edge to Positive.
  6. Measure the time difference between the rising edges of CH1 and CH2

相关产品和解决方案

数字信号示波器 DLM2000 MSO系列

供每个工程师使用的200、350和500MHz混合信号示波器。具有一流的可用性以及采集、分析和显示性能,价格也在您能够承受的范围内。

数字式混合信号示波器

让我们来感受世界一流的横河示波器:自1988年首款机型面世以来,YOKOGAWA一直不断创新,致力于电力电子、机电一体化和新能源等前沿行业专用示波器的研发,近期又推出全新DLM系列示波器,既有面向低成本市场的4CH MSO示波器——DLM2000系列,也有业界唯一的全新8CH MSO示波器——DLM4000系列,在由智能控制的消费电子和工业驱动等电路设计的众多领域中,成为全球工程师的首选工具。

波形测量仪器

Yokogawa提供世界一流的数字示波记录仪:数字示波记录仪具有高速采样能力和大测量带宽,可用于设计和开发电子设备。示波记录仪集数字示波器和多通道数据记录仪的优点于一身。

返回顶部
WeChat QR Code
微信扫一扫
获得更多专业服务