技术与服务热线:400 820 0372

用于WT300系列的WTViewerFreePlus软件 (附带)

WTViewerFreePlus是一个应用软件,用于获取测量得到的数值、谐波和波形数据。这些数据可以通过USB、GP-IB/RS-232或以太网通信接口传至PC,并在PC机上显示和保存。

You can use WTViewerFreePlus to connect WT300 / WT300E series power meters (hereafter referred to as WT) to a PC and:

  • Retrieve, display, and save data that the WT has measured and setup parameters
  • Remotely control the WT

设置窗口

除了可以在仪器面板上设置参数外,还可以用软件快速设置合适的条件。所有设置参数和状态一目了然。尤其是可以设置量程跳转(量程配置)并指定THD运算的最大分析次数。 SettingWindow LG

 

 

测量窗口

 

这款软件可以显示很多WT300系列显示器上无法显示的测量项目,如多个测量参数数值、每次谐波数据、棒图、趋势图和电压/电流的波形。通过这款软件,用户可以轻松发掘WT300系列的高性能所在。 MeasurementWindow LG



 

Multiple units

  • WTViewerFreePlus can connect up to four WT300 / WT300E series units (with same model code).
  • The WT300 / WT300E series provides flexibility by offering various communication interfaces such as USB, Ethernet, GPIB and RS-232.
  • With the "Device Search" feature, the software allows automatic PC connection.
  • The software allows instrument configuration and measurement of up to 200 measurements simultaneously.

WtViewerSync

When the connection is established and the WT and PC are online, an illustration indicating this stage appears.

Software Menus

Connection: Communication configuration between WT and PC
Setting: Set up WT measurement parameters
Measure: Display measured results in bar graphs, trend graphs, etc.
File: Save and load setup parameters
Exit: Exit the software

Types of Display Screens

The following types of display screens are available.

  • Numeric
    Displays WT’s measurement data numerically. For models with the harmonic measurement option
    (/G5), harmonic measurement data is also displayed.
  • Numeric List
    Lists harmonic measurement data for each harmonic order.
    Numeric lists can be displayed when the WT is equipped with the harmonic measurement option
    (/G5).
  • Numeric Matrix
    Displays WT’s measurement data for each element.
  • Waveform
    Displays waveform display data that has been collected from the WT.
    Waveforms can be displayed when the WT is equipped with the harmonic measurement option
    (/G5).
  • Trend
    Displays changes in measured data over time on a trend graph.
  • Bar Graph
    Displays measured harmonic components for each harmonic order.
    Bar graphs can be displayed when the WT is equipped with the harmonic measurement option
    (/G5).

Functions

Measuring Mode Normal, harmonics, integration
Types of Files Waveform, calculated values, harmonics, settings
Display Screens Numerical, waveform*, trend, harmonic Bar Graph*
* /G5option is required on .
Data Acquisition Interval 100 ms at max. speed.
- The data storage period can be any custom settings (more than 2 seconds) and the data update rate of the body.

- Depends on your PC's performance.*When the WT data update interval is shorter than the time it takes for the software to collect one set of measured data, there will be pieces of data that the software will not collect.

System Requirements

PC CPU Pentium 4 1.5 GHz or faster recommended
Memory 2 GB or more recommended
HDD 1 GB free space or more
Operating System English version of Microsoft Windows XP (SP3 or later)1, Windows Vista 1 or Windows 7 2
1 32-bit versions are supported.
2 32-bit versions and 64-bit versions are supported.
Communication Board GP-IB NI (National Instruments)
PCI-GPIB or PCI-GPIB+1
PCIe-GPIB or PCIe-GPIB+1
PCMCIA-GPIB or PCMCIA-GPIB+1, 2
GPIB-USB-HS3
1 NI-488.2 driver Ver. 1.60 or later (except Ver. 2.3)
2 Not supported on Windows Vista or Windows 7
3 Use driver NI-488.2M Ver. 2.8.1 or later.
RS-232 An available PC COM port
Ethernet An Ethernet port that supports 10BASE-T or 100BASE-TX
USB A USB port that supports USB Revision 1.1 or higher
Display, Printer, and Mouse Screen Resolution 1024×768 dots or higher
Operating System Operating system mentioned above

List of functions

Display Numeric Data Display Available
Waveform Display Available
Trend Display Available
Harmonic Bar Display Available
Vector Graph Display Function N.A.
X-Y Display N.A.
Display From the PC Available
Types of Files Conversion to CSV Available
Data Acquisition Interval 100 ms at max. speed. Available

The WTViewerFreePlus is  a free software including the IM CD.
It can detect connected WT300 series automatically and there are dedicated Setting page and Measurement page separately.




Setting page

Data displaying page

Wtvfreeplus4

Max. order setting of THD calculation

Range skip (configuration) setting

Multi-Language Support

Wtvfreeplus7

寻找更多销售、技术和解决方案的信息?


联系我们

Precision Making

返回顶部
WeChat QR Code
微信扫一扫
获得更多专业服务