Item |
Specifications |
||||||||||||||||||
Standard operating conditions | Temperature: 23 ±5°C Humidity: 20% to 80% RH After a 30-minute warm-up and after calibration |
||||||||||||||||||
Function | Temperature (thermocouple) or voltage measurement (switchable) | ||||||||||||||||||
Number of input channels | 2 | ||||||||||||||||||
Input coupling | TC, DC, and GND
|
||||||||||||||||||
Data update rate | 500Hz | ||||||||||||||||||
Measurement range/accuracy1 | [Voltage measurement] Voltage sensitivity: 100 µV/div to 10 V/div (1-2-5 steps) Voltage accuracy: ±(0.08% of 10 div + 2µV) [Temperature measurement]2
|
||||||||||||||||||
Frequency characteristics1 (–3 dB point when a sine wave of amplitude ±3 div is applied) |
[Voltage measurement] DC to 100 Hz [Temperature measurement] DC to 100 Hz |
||||||||||||||||||
Maximum input voltage4 (at a frequency of 1 kHz or less) |
Both temperature and voltage input: 42 V (DC + ACpeak) | ||||||||||||||||||
Maximum allowable common mode voltage5 (at a frequency of 1 kHz or less) |
Both temperature and voltage input: 42 V (DC+ACpeak) (CAT II, 30 Vrms) | ||||||||||||||||||
Vertical resolution | [Voltage measurement] During voltage input: 2400 LSB/div [Temperature measurement] When measuring temperature: 0.1°C |
||||||||||||||||||
–3 dB point when AC coupled low frequency attenuation point | [Voltage measurement] 0.5 Hz or less | ||||||||||||||||||
Input connector | Binding post | ||||||||||||||||||
Input impedance | Approx. 1 MΩ | ||||||||||||||||||
Common mode rejection ratio | [Voltage measurement] 80 dB (50/60 Hz) or more (typical6) [Temperature measurement] 120 dB or more (50/60 Hz, with 2-Hz filter ON, signal source resistance of 500 Ω or less) (typical6) |
||||||||||||||||||
Residual noise level (Input section shorted) |
[Voltage measurement]: ±4 µV or ±0.01 div, whichever is greater (Typical6) | ||||||||||||||||||
A/D conversion resolution | [Voltage measurement] 16 bits (2400 LSB/div) | ||||||||||||||||||
Temperature coefficient | [Voltage measurement] Zero point: ±(0.01% of 10 div)/°C + 0.05µV/°C (typical6) Gain: ±(0.02% of 10 div)/°C (typical6) |
||||||||||||||||||
Reference junction compensation accuracy (when the input terminal temperature is balanced) | K, E, J, T, L, U, N: ±1°C R, S, B, W: ±1.5°C Au7Fe: ±1K |
||||||||||||||||||
Bandwidth limit (digital filter) | Select from OFF, 30 Hz, 8 Hz, and 2 Hz | ||||||||||||||||||
Input bias current | 20 nA or less The zero point appears to be offset when the input is open due to the effects of bias current on this module. However, this is not a malfunction. Connect the input to the object to be measured. |
1. Value measured under standard operating conditions.
2. Does not include the reference junction temperature compensation accuracy.
3. This module supports Au7Fe with 0.07% metal content with respect to gold.
6. The typical value is a representative or standard value. It is not strictly warranted.
严苛的测量条件需要高性能与灵活的解决方案。这就是DL350示波记录仪的设计理念。 DL350与其它示波记录仪共用同样的18种插拔模块,电池供电使其易于携带,可在受限的空间中使用。
DL350最多提供8路模拟量和16路数字量通道,采样率可达100MS/s,最大绝缘电压1KV,最高分辨率16位,支持多种模块,可灵活配置,适用于各种长时间和瞬间变化波形的测量。
可充电电池的使用,不仅使得现场测试成为了可能,它与主电源配合,还起到了UPS的作用。
横河测试测量实时测量与谐波分析大量信号,加快开发与故障查找速度。波形记录仪DL850E可以捕捉与分析瞬态事件,显示长达200天的趋势波形。通过插拔模块,可以灵活组合电信号与物理信号(传感器信号,如CAN、LIN和串行总线)的测量,还能实现实时功率分析运算的触发。