700924 DIFFERENTIAL PROBE 1400V / 100 MHZ
Frequency bandwidth: DC to 100 MHz
Applicable for all Digital Oscilloscopes or ScopeCorders.
With increases in the speed of measured signals in recent years, it has become necessary to make floating measurements over a wide frequency band. The 700924 differential probe lets you make wide-band (100 MHz) differential input measurements by just connecting the probe to the input of a single-end input digital oscilloscope.
Oscilloscope input amplifiers are normally single-ended. They do not provide accurate measurements when used in combination with a 10:1 passive probe for measuring the gate-to-source voltage of a switching power supply, or potential difference with a common mode voltage in elements such as Insulated Gate Bipolar Transistors (IGBTs).
Furthermore, there is a risk that current will enter through the oscilloscope ground line and damage the oscilloscope.
|Input type||Balanced differential input|
|Frequency band||DC up to 100 MHz (-3 dB)|
|Input attenuation ratio||Switched between 1/100 and 1/1000|
|Input impedance||Approximately 4 MΩ, approximately 10 pF parallel|
|Gain accuracy||±2% (common mode voltage: 400 V or less)
±3% (common mode voltage: 1000 V or less)
|±350 V (DC + ACpeak) or 250 Vrms (1/100 range)
±1400 V (DC + ACpeak) or 1000 Vrms (1/1000 range)
|Maximum common mode
|±1400 V (DC + ACpeak) or 1000 Vrms (both 1/100 and 1/1000 ranges)|
|Maximum input voltage||±1400 V (DC + ACpeak) or 1000 Vrms (1/1000 range)|
|Common Mode Rejection Ratio (CMRR)||-80 dB (60 Hz), -50 dB (1 MHz)|
|Output voltage||±3.5 V|
|Output impedance||Used with 1 MΩ input impedance|
|Power supplies||Dry cells, four R6P (SUM-3); when using the AC/DC adapter, use an output voltage of 6 V/200 mA or greater/center plus|
|Dry cell life||Approximately 2 hours under continuous use|
|External dimensions (approximate)||207 mm x 83 mm x 38 mm¹|
|Total length||Approximately 1.5 meters|
|Weight||Approximately 800 grams (excluding dry cells)|
|Approved standards||EMC: EN55011: 1991 + A1: 1997 + A2: 1996
Safety: EN61010-1: 1993 + A2: 1995
¹: 38 mm is listed as the maximum value.
Note: Dry cells and AC/DC adapter not included.
Model and Code
|Differential probe||700924||DC to 100 MHz band|
Each 700924 differential probe comes standard with red and black pincher tips (one each).
|Bulletin 7009-24E||700924 100 MHz band differentital probe||