To evaluate AC adaptors, engineers must acquire the voltage, current, power, and I/O efficiency of input signals (100 VAC) and DC output signals (12 VDC) in both loaded and unloaded states. There are also cases where two outputs come from one AC signal input. The WT500 Power Analyzer handles these tasks efficiently because it can calculate total efficiency and other parameters under those conditions in a single unit.

Evaluation And Efficiency Measurement

You can display the AC voltage, current, and power from the input plus two systems of measured DC voltage, DC current, and power from the output. I/O efficiency ((output power 1 + output power 2) /input power) can also be displayed.

Evaluation And Efficiency Measurement 2 1

  * With no load, current can be a repetitive intermittent signal with widely fluctuating current values resulting in unstable power values. In this case, you can average the data by lengthening the data update rate or by using the Average function. If this does not stop the fluctuation, you can calculate the average power value by measuring mean active power with the Integration function.

Calculation of Average Active Power
Evaluation And Efficiency Measurement 3
Evaluation And Efficiency Measurement 4 1
Since intermittently-occurring instantaneous power values constantly fluctuate as in the figure above, the displayed value differs at each data update. However, if the repeatedly occurring instantaneous power values are averaged, the average approaches a knowable, constant value that can be confirmed.

Evaluation And Efficiency Measurement 5

Solution Features
  1. High accuracy DC and AC measurement
  2. Efficiency measurement
  3. Simultaneous DC and AC Measurement
  4. Average active power calculation
  5. Variety of display formats and data saving
WT500 Features
  1. AC and DC Accuracy: 0.1% of Reading
  2. I/O efficiency ((output power 1 + output power 2) /input power) can be displayed
  3. Simultaneous DC and AC Measurement
  4. Calculates average power of even unstable signals by measuring mean active power.
  5. Measurement values can be saved as images or numerical data, and can be pasted into reports, analyzed in spreadsheet software, or used in a variety of other ways.

Power Analyzers

Power Analyzers

A power analyzer measures electrical power characteristics of devices that generate, transform, or consume electricity. Also called power meters or wattmeters, these devices measure parameters such as true power (watts), power factor, harmonics and efficiency in inverters, motor drives, lighting, home appliances, office equipment, power supplies, industrial machinery and other devices. Power analyzers also enable engineers to minimize energy loss due to distorted, transient waveforms in power electronics such as inverters, motors, lighting circuits, and power supplies. 

Yokogawa, the world's leading manufacturer of electrical power analyzers, provides a broad selection to satisfy all requirements.