Yokogawa has been providing instrumental service to industry giants as part of our core business since our early beginnings. We continue to provide critical tools such as the WT3000E and the SL1000 and a wide variety of precision power analyzers to industry leaders for use in compliance testing. Yokogawa is dedicated to protecting the global environment. One way we do this is through our partnerships with industry leaders who are also dedicated to the global environment and providing channels for superior energy efficiency. Yokogawa designs products specifically to test such industry standards as Energy Star and UL.
【search key】 WT1, WT18, WT180, WT3, WT30, WT5, WT50, WT500, WT
In the test of new washing machine, voltage, current, power, and the control signal on the time control panel need to be recorded.
Energy consumption in low-power and standby modes is an important issue due to increased awareness that energy resources are becoming limited and demand for energy-saving household electrical appliances continues to grow. IEC62301 Ed2.0 (2011) and EN 50564:2011 define standby mode as the lowest energy consumption of an appliance not performing its main function, when connected to the mains. IEC62301 Ed2.0 (2011) defines test methods and requirements for both the mains supply and the test equipment. It is crucial that design and test engineers choose highly accurate power measurement tools to confirm that their devices meet these requirements.
Evaluation of high efficiency motors in large air heaters
Measuring efficiency with high precision: simultaneous measurement of input and output
Using the OR trigger and Dual Capture, it is easy to trap and record failure conditions on electrical harnessses (wiring interconnects) over a long duration test.
Observation of Inverter Switching Waveforms
Measuring Conversion Efficiency of Power Conditioner
Surge Waveform Recording & Power Monitoring
Evaluation of Wireless Charging System for EV/PHV
Reference equipment for power calibration
Evaluating Magnetic Components
Characteristics of Transient Response from Industrial Robots
In recent years the buzzword "all electric" is becoming popular, which refers to kitchen appliances, water heaters, and other devices in the home all being supplied with electric power.
Prevention of global warming has become an issue in recent year, and industry is turning more and more toward stricter energy savings policies and the use of renewable energy.
Capture and recreate waveforms with a DLM2000 and FG420
Lighting products need to evaluate not only power parameters but also temperature.
In recent years the buzzword “all electric” is becoming popular, which refers to kitchen appliances, water heaters, and other devices in the home all being supplied with electric power.
Evaluation of vacuum cleaner requires to measure distorted waveform.
If a product uses power, then power consumption and power quality measurements must be made as part of product design and test. These measurements are essential to optimize product design, comply with standards and provide nameplate information to customers.
This article will discuss best practices for making these measurements, starting with power measurement basics and proceeding to the types of instruments and associated components typically used to make measurements. The article will conclude with real-world examples, which apply the information imparted earlier in the article to solve practical measurement problems. Although most of us have been exposed to basic power measurement equations, a primer is helpful to summarize this information and to show how it applies to product design and test.
One of the main responsibilities of engineers and technicians is data analysis, and this article will show how multi-touch technologies can be used to improve the performance of this and other related tasks.
In this application note you will learn when and how to use different methods to connect a current transformer to a power analyzer.
This white paper describes the WT1800, a precision power analyzer that has been replaced by the WT1800E, a unit with numerous improvements including better accuracy. Please visit the WT1800E product page to learn more about the WT1800E.
To keep pace with the increasing speed of switching devices in inverters, Yokogawa has developed the WT1800 precision power analyzer with 10 times faster sampling speed and 5 times wider frequency bandwidth compared with previous models. Its basic accuracy is 0.15% and the frequency bandwidth of voltage and current is 0.1 Hz to 5 MHz (-3 dB, Typical) including the DC component. With up to six inputs, a single WT1800 unit can measure the efficiency of three-phase inverters. In addition, the high-speed data capturing mode allows the WT1800 to measure transient power. This paper describes the high-speed, real-time power measurement technologies underlying these functions.
This white paper describes the WT1600 precision power analyzer, a model that has been discontinued and replaced with the WT1800E. Please visit the WT1800E product page for more information regarding the WT1800E.
We have developed the WT1600, a high-precision, wide-bandwidth power meter. The WT1600 can measure DC and AC signals from 0.5 Hz to 1 MHz with a basic power accuracy of 0.1%. With the maximum of six input elements installed, a single WT1600 can measure the efficiency of a three-phase inverter. In addition to the functions of conventional power meters, it has wider ranges and various functions including waveform display. This paper gives an outline of the WT1600.
The 4-to-8 channel Yokogawa DLM5000 mixed signal oscilloscope allows users to easily navigate through a wealth of analysis features at the touch of their fingertips.
The DLM3000 Automotive Serial Bus features can display up to four simultaneous serial buses and decoded data.
In this video we review the major features of the DL350 showcasing its portability, functionality, and operability. This device features battery power, 18 signal conditioning input modules, and touchscreen access to enhanced triggers, math, and analysis.
The Yokogawa DLM3000 oscilloscope features a brand-new computing platform and available power supply analysis functions.
The Power Consumption Measuring Software from Yokogawa Test&Measurement provides a comprehensive solution for standby power testing and meets the requirements of:
In this video, application engineer Kourtney Morrison demonstrates how to use the software for easy standby power measurement.
This video demonstrates how to measure transient phenomena on power signals using the Yokogawa Test&Measurement PX8000 Precision Power Scope.
In several applications, especially those testing AC power to a standard such as IEC61000-3-11, the voltage and current signals must be monitored to confirm there are no major dips and/or swells in the signal. This can be done with instruments capable of reporting rms values, including power analyzers, traditional oscilloscopes, and some data acquisition systems.
To test to a standard, however, the instrument must have an accuracy spec that is traceable back to a national standard of calibration such as ISO17025 or NIST.
A demonstration reading a 4 - 20 mA transducer into an analog channel on the DL350 Portable ScopeCorder.
Using the DL350 Memory Recorder Mode Easy Setup, combined with a 16-channel thermocouple input, it's easy to record hours, days, or weeks of data with a few simple settings.
Looking for more information on our people, technology and solutions?