How do I Recover From a DL850 ScopeCorder Firmware Upgrade Failure?

If during the DL850/DL850 ScopeCorder firmware upgrade process, the display screen turns black, blue, or something in between and the installation failed, please complete the following steps. You will need a USB printer cable to complete the recovery process.
  1. Download the file
    http://support.us.yokogawa.com/downloads/TMI/HFI/DL850/DL850_Recovery_to_110_via_USB_Cable.zip
  2. Contact Yokogawa Technical Support with the unit's serial number and for zipped file password
  3. Unzip all files to a folder destination
  4. Connect the DL850 to PC with a USB printer cable
  5. Install the USB driver onto your PC
  6. Power DL850 OFF
  7. While holding the F2 soft key, power DL850 ON
  8. Wait for at least 15 seconds
  9. Double click the Update850.BAT file
  10. Follow on-screen prompts
  11. When binary upload to DL850 is complete, cycle the power
  12. Power DL850 ON
  13. Allow firmware installation to complete

Related Products & Solutions

Data Acquisition (DAQ)

Simplify complex testing with DAQ systems that flex to your needs. Capture and analyze any physical or electrical signal with ease, transforming signals into actionable insights that speed innovation and improve reliability.

High Speed Data Acquisition

  • PC-based, streaming, local or remote operation
  • 20+ modules, isolated and versatile inputs
  • Up to 200 MS/s or 640 ch

Isolated Oscilloscopes | ScopeCorders

  • An integrated measurement system for every electromechanical application
  • Modular platform combines oscilloscope and DAQ functionality 
  • Capture high-speed transients and low-speed trends 

Oscilloscopes

Accelerate design and troubleshooting with oscilloscopes that combine high-speed sampling, long record lengths, and mixed-signal analysis. From quick debug to advanced R&D, Yokogawa oscilloscopes help you see deeper, work faster, and design smarter.

Precision Making

Top