Datum-Y Firmware

Datum-Y firmware update

Datum-Y
Datum-Y AC adaptor
Compact Flash Card (Formatted): Product of SanDisk is recommended.

Version	Date	Contents
3.05	Nov, 2010	The reliability of the file writing was improved to respond to the unexpected such as interruption of power supply etc. when writing data to the file.
3.04	Dec, 2008	Function for specific customer was added.
3.03	Nov, 2008	A certain problem is found in an OS in use, the firmware was upgraded.
3.02	May, 2007	Function were added and upgraded as follows. Simultaneous communication service for LAN＋RS-232, LAN＋RS-485 File divide function is added. Revised DCV:±50V range（used to ±30V） Revised from arithmetic function to four arithmetic operation (used to difference arithmetic) *Revised Scaling setting manner

Version	Date	Contents
2.10	Nov. 2010	The latest update program was applied to operating system (OS) used to the product.
2.02	Mar. 2009	While the LCD back light is off, the equipment is corrected which is noted only occasionally turns out to be failure when the back light is turned on by pressing any key.
2.01	Nov. 2008	A certain problem is found in an OS in use, the OS was upgraded.

This manual describes how to upgrade the firmware or OS of Datum-Y in order to upgrade functions and modify defects.

When you upgrade the firmware or OS of Datum-Y, follow carefully to the instructions.
Make backup copy of the data in the Datum-Y internal memory to external memory cards.
In the consequence of upgrading, the data saved in the Datum-Y is not guaranteed at all.
Use the AC power supply and make sure the power does not go OFF during the upgrade operation.

Please read Software Agreement carefully before downloading.

下载软件即表明接受本软件协议。