In conjunction with Grid TLS, optical attenuator and optical switches, an EDFA auto test system can easily be established. This system does not require manual reconfiguration of optical paths and adjustments of EDFA input power, and that improves measurement throughput and avoids a human error. AQ2200 series is a modular system suitable for building such a system.
Ideal Reference LightSources for Optical Device Measurements. When the modules are mounted in the AQ2200 series frame controllers, it provides a high-output, high-stability measurement.
High Stability reference laser light sources for DWDM channel measurements. The one or two channel modules are part of an integrated optical device testing solution for the AQ2200 series frame controller platform.
AQ2200-136 TLS module is a tunable light source designed for the AQ2200 multi-application test system. Although it is lightweight with a small, 2-slot module, it is capable of tuning range the 1440 nm to 1640 nm.
The AQ2200-141 and AQ2200-142 provide excellent level stability of ±0.005 dB or better over a 15-minute period and offer excellent stability for all of your measurements.
The AQ2200-141 and AQ2200-142 are FP-LD light sources for the AQ2200 series. When they are mounted in AQ2200 series frame controllers, they provide high-output, high-stability optical output.
The AQ2200-211 is a high-speed longwave sensor for theAQ2200 series.
Ideal for measuring output power of transmission equipment and optical fiber amplifiers.
Increase your testing power and capability with the AQ2200-221 sensor module. Thirty two ports can be simlutaneously collectively measured using 16 units of AQ2200-221.
AQ2200-231 is AQ2200 series longwave large-diameter sensor heads. When they are installed in AQ2200 series frame controllers using the AQ2200-201 Interface Module, they allow optical power to be measured at high speed and with high accuracy.
Optical Return Loss (ORL) and Insertion Loss (IL) measurements of Optical Component.
With built-in optical power meter for monitoring power
Compact and lightweight optical variable attenuator.
SM, GI50 and GI62.5 optical fiber models available.
With built-in optical power meter for monitoring output power
Compact and lightweight dual optical variable attenuator
Compact bit error rate tester dedicated to high-speed 10 Gbit/s Band
The AQ2200-621 and AQ2200-622 are optical modulator modules designed for use with the AQ2200 Series AQ2200-601 BERT Module.
Yokogawa's Optical modulator and optical receiver for 10G BERT module offers high quality features.
Cost efficient and flexible solution to build 10 Gbit/s optical BERT system
The AQ2200-642 reduces the complexity and cost of 10G optical transceiver testing by combining bus and power control features into the same mainframe that performs Signal Generation, BERT and Optical testing.
The AQ2200-651 Signal Generator module reduces the complexity and cost of 10G optical transceiver testing by combining Signal Generation functions into the same mainframe that provides bus and power control while performing BERT and Optical testing
"Hot-swapping" capability and remote monitoring and control are even easier with Ethernet support.
The multi application test system is available in two different frame controller platforms. Each model has a certain number of slots for connecting modules, so you can select the best platform size for your intended measurement applications.